INCH-POUND MIL-M-38510/113B 21 June 2005 SUPERSEDING MIL-M-38510/113A 10 February 2005 MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, 8 BIT, DIGITAL-TO-ANALOG CONVERTERS, MONOLITHIC SILICON This specification is approved for use by all Departments and Agencies of the Department of Defense. Reactivated for new design as of 10 February 2005. May be used for either new or existing design acquisition. The requirements for acquiring the product herein shall consist of this specification sheet and MIL-PRF-38535 1. SCOPE 1.1 Scope. This specification covers the detail requirements for monolithic silicon, 8 bit, digital-to-analog converters. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.4) 1.2 Part or Identifying Number (PIN). The PIN is in accordance with MIL-PRF-38535, and as specified herein. 1.2.1 Device types. The device types are as follows: Device type Circuit 01 D/A Converter, 8 bit, 0.19% linearity 02 D/A Converter, 8 bit, 0.10% linearity The device class is the product assurance level as defined in MIL-PRF-38535. 1.2.2 Device class. 1.2.3 Case outline. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line 1.3 Absolute maximum ratings. Supply voltage +V (-V ) ......................................................... 36 Vdc CC CC Voltage, digital input to negative supply V (-V ) ................... 0 to 36 Vdc logic CC Voltage, logic control (V ) ............................................................... -V to +V LC CC CC Reference voltage input (V , V ) .................................................... -V to +V 14 15 CC CC Reference input current (I ) ............................................................ 5.0 mA 14 Reference input differential voltage (V V ) .............................. 18 Vdc 14 15 Lead temperature (soldering, 60 sec) ............................................. +300C. Junction temperature (T ) ................................................................ +175C J Storage temperature ........................................................................ -65C to +150 C Comments, suggestions, or questions on this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, 3990 East Broad St., Columbus, OH 43218-3990, or emailed to mailto:linear dscc.dla.mil . Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at MIL-M-38510/113B 1.4 Recommended operating conditions. Supply voltage range ....................................................................... 5 Vdc to 15 Vdc 1/ 2/ Ambient temperature range ............................................................. -55C to +125 C 1.5 Power and thermal characteristics. Case outline Package Maximum allowable maximum maximum JC JA power dissipation E Dual-in-line 400 mW T = 125C 35C/W 120C/W A 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed. 2.2 Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATIONS MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard for Microelectronics. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. (Copies of these documents are available online at