Bussmann TRON In-Line Fuseholders HET Single-Pole for Solid Neutral Series Catalog and Specification Data - Non-Breakaway Conductor Terminals Conductors Catalog Terminal Type Size Symbol Load & Line (2 & 3) Copper Crimp 12 to 8 1 A 12 2 10 2 Non-Breakaway Holders 6 1 B Catalog Symbol: HET-AA, HET-AB, HET-BB, HET-JJ, and 4 1 HET-JK Copper Set-Screw In-Line Fuseholders, Single-Pole 12 to 3 1 J Water-Resistant 12 to 2 2 K For breakaway holders, see page 2 HET A HEB fuseholder with a permanently installed solid Aluminum Set-Screw neutral. Easily identified by white plastic coupling nut. 12 to 2 1 L Example: A single-pole, in-line holder for a neutral is required. One solid copper 8 is on the load side, copper crimp for connection. A Catalog Data Insulating Boots solid copper 6 is on the line side, and a copper crimp is Catalog Numbers Type required. 2A0660 Single Conductor 1. Choose HET- series. 2A0661 Two Conductor 2. Choose A for load side. 3. Choose B for line side. Complete Catalog Number: HET-AB. Insulating boots are not included with non-breakaway parts and must be ordered separately. They come standard with the breakaway series. The HET-AW & HET-JW do not have the boots. These catalog items do not have a breakaway recep- tacle. Ordering Information: When boots are utilized, extra heat retention requires that fuses HET are sized at a minimum of 200% of the RMS load current. Load Line Terminal Terminal Recommended Torque on Coupling Nut: 10-20 in-lb. Form No. HET Series Page 1 of 2 7-16-03 N03082 Data Sheet: 2125 No. Per Terminal Solid Stranded Bussmann TRON In-Line Fuseholders HET Single-Pole for Solid Neutral Series Catalog and Specification Data Breakaway Holders Breakaway Receptacles Catalog Symbol: HET-AW-RLC-A, HET-AW-RLC-B, Conductor Data Catalog HET-AW-RLC-C, HET-AW-RLC-J, HET-AW-RYC, Terminal Type Size Symbol Line HET-BW-RLC-B, HET-BW-RYC, HET-JW, HET-JW-RLC-J, Terminal HET-JW-RYC, and HET-AW (3) In-Line Fuseholders, Single-Pole Copper Crimp 12 to 8 1 -RLC-A Example: 6 1 -RLC-B 4 1 -RLC-C A single-pole, in-line, breakaway holder for a neutral is Copper Set-Screw requested. A single 10 solid, copper crimp is on the load side. A single 10, solid wire and a copper crimp is needed 12 to 3 1 -RLC-J on the line side. 1. Choose HET- series. 2. Choose A from 1st page for load side. 3. Choose W for breakaway requirement. 12 to 3 2 -RYC 4. Choose RLC-A for breakaway receptacle on line side. Complete Catalog Number: HET-AW-RLC-A Solid Breakaway (Required with W breakaway Receptacle) Ordering Information: W HET Load Line Terminal Terminal Recommended Torque on Coupling Nut: 10-20 in-lb. The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con- tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. HET Series Page 2 of 2 7-16-03 N03082 Data Sheet: 2125 No. Per Terminal Solid Stranded