Auxiliarycontacts Partno. HI11-P1/P3E Articleno. 061813 Deliveryprogramme Product range Accessories Auxiliary contact Late-break switching-on behavior, early-make switching-off behavior. The N/O is always connected as a load-shedding contact. For left and/or right side mounting Contacts 1 N/O, 1 N/C For use with P1-/E, /EA, /EZ P3-/E, /EA Rated uninterrupted current I A 10 u Approvals Product Standards UL 508 CSA-C22.2 No. 14-05 IEC/EN 60947-5 CE marking UL File No. E36332 UL CCN NLRV CSA File No. 12528 CSA Class No. 3211-05 NA Certification UL listed, CSA certified Auxiliarycontacts Standards Control circuit isolators to IEC/EN 60947-5 Rated insulation voltage U V 500 i AC Rated uninterrupted current I A 10 u Rated operational current I A e AC-15 230 V I A 6 e DC-13 I e 125 V I A 1.1 e 250 V I A 0.55 e Short-circuit rating Maximum fuse A 10 gG/ gL Terminal capacities 2 mm Solid 2 0.75 - 2.5 mm Flexible with ferrule to DIN 46228 2 0.5 - 1.5 mm Tightening torque Nm 0.6 -5 Control circuit reliability at 24 V DC, 10 mA Fault H F < 10 , < 1 fault in 100 000 operations probability Tec hnic aldataETIM4.0 Number of auxiliary contacts as normally open contact 0 Number of auxiliary contacts as normally closed contact 0 Rated permanent current Iu A 0 Number of poles 0 Conditioned rated short-circuit current Iq kA 0 Degree of protection (IP), front side - Number of auxiliary contacts as change-over contact 0 Interlockable No Motor drive integrated No Connection type main current circuit Screw connection Version as emergency stop installation No Type of control element - Version as main switch No 06/20/2012 HPL-ED2012 V1.1 EN 1 / 2Version as switch disconnector compact No Version as safety switch No Version as maintenance-/service switch No Rated operation power at AC-23, 400V kWh 0 Rated operation power AC-3, 400 V kWh 0 Suitable for ground mounting No Suitable for front mounting No Suitable for front mounting center No Suitable for distribution board installation No Suitable for intermediate mounting No Max. rated operation voltage Ue AC V 0 Motor drive optional No Voltage release optional No Device construction - Dimens ions P1 P3 06/20/2012 Eaton Industries GmbH 2 / 2