Power & Control Equipment HSK Heat Shrink Kit Applications Ordering Information The airport lighting Heat Shrink Kit Description Catalog Number features a mechanically tough polyole- fin heat-shrinkable sleeve. The sleeve HSK (2-piece) 10047-1425 is designed so that one diameter will HSK (1-piece) 10047-2154 fit all common L-823 connector/cable combinations including cables as small as 0.360 inch diameter. The 1-piece HSK * Both pieces contain the same total length of sleeve is factory coated with a water- tubing: 16 inches (406 mm) proof sealant at the ends only, leaving the L-823 connector clean and re-enter- able. The main purpose is to seal the Note: Use the 2-piece HSK for connections L-823 connector/cable joint, not to seal at the isolation transformer as Shipping Weight: 0.5 lbs. the plug/receptacle mating. The 2-piece illustrated below. For cable-to-cable 0.23 kg. HSK has sealant the full length. splices, use the 1-piece HSK to Shipping Volume: 0.05 cu. ft. The crosslinked polyolefin sleeve enclose the entire connection. 0.0014 cu.m. provides excellent moisture, oil and fuel protection for L-823 connectors used in L-868 and L-867 bases, or direct buried. The sleeves are tough and withstand Technical Data direct burial abuse. Upon the application of heat in excess of 275F (135C) the sleeve quickly shrinks to a tight fit, conforming to the irregular shape of the L-823 connector/ cable transition. The shrinking action PLUG causes the sealant to melt and flow, TAPE WRAP RECEPTACLE L-823 KIT HSK SLEEVE (2-PIECE) BY OTHERS forcing it into contact with the under-ly- RECEPTACLE PLUG ing surfaces. Upon cooling, the sealant TRANSFORMER LEADS forms a positive barrier with high adhe- sive strength. The process is complete when the sealant is squeezed from the ends of the sleeve and the heat-sensi- tive paint on the outside of the sleeve changes color from blue to gray. 1. Slide the sleeve over cable before 2. Pre-heat cable jacket. Begin shrinking 3. Shrinking is complete when melted making electrical connection. Mate at center, working toward both ends. sealant is squeezed from both ends of connector sections and wipe dirt from Use a back-and-forth, sweeping motion the sleeve and all heat-sensitive paint connector and cable. Clean cable with of the torch. has changed from blue to gray. solvent wipe. 4.28 www.crouse-hinds.com/airportlightingX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Fuse Holder category: Click to view products by Eaton manufacturer: Other Similar products are found below : 570-290-741P40 570-290-751P40 0031.1351.01 020417G 020418E 80910030 8601.2020 9-3557-GP REV A 15600-08-10 BK1-HTC-45M BK/FHN19G BK/HJM-HH BK/HKP-CCHH BK/HKP-E-CC BK/HKP-E-HH BK/HKP-EH-HH BK/HKP-JJ BK/HKP-U-HH BK/HTJ-LES- FUSE HMG-241 2086-1 2193 2602 2650 FHN31G1 G4PB8 2660 2799 CQ-209V 345621A 3794 4202 4408 4413 4423 4482 4532 4537 TSD1404-12 BK/FHN31G1 BK/HKP-H-CC BK/HKP-JQ-BB BK/HKP-JQW-BB BK/HKP-N-HH BK/HKP-S-CC BK/HKP-W- BBHH BP/HHS BPHHU C1933 32NNL