Effective October 2017 Technical Data 3001 Supersedes May 2017 HALOGEN 3216FF HF Pb Fast-acting Chip surface mount fuse FREE Environmental data Thermal Shock: MIL-STD-202, Method 107, Test Condition B (-65 C to +125 C) Vibration: MIL-STD-202, Method 204, Test Condition C (55 Hz - 2 kHz, 10 G) Moisture Resistance: MIL-STD-202, Method 106,10 day cycle Solderability: ANSI/J-STD-002, Test B Product features Additional resistance to solder heat test: MIL- AEC-Q200 qualified (250 mA to 7 A) STD-202G Method 210F Condition A Fast-acting surface mount fuse Operating Temperature: -55 C to +125 C Ratings up to 30 amps AEC-Q200 qualified (250 mA to 7 A) Excellent temperature and cycling characteristics Ordering Compatible with reflow and wave solder Agency information Specify packaging and product code (i.e., TR/3216FF250-R) UL Recognition Guide JDYX2 & File E19180. Electrical Characteristics CSA Component Acceptance: 053787 C 000 & Amp Rating % of Amp Rating Opening Time Class No: 1422 30. 250mA - 30A 100% 4 Hrs. Min. cURus Recognition File: E19180, Guide JDYX2/ 1.25A - 3A 200% 60 Sec. Max. JDYX8 250mA - 3A 250% 5 Sec. Max. 4A - 7A 350% 1 Sec. Max. Soldering method 10A - 30A 350% 5 Sec. Max. Wave Immersion: 260 C, 10 sec max. Infrared Reflow: 260 C, 30 sec max. Speci cations Part Volt Ratings Typical Melt Typical Voltage Agency Approvals Interrupting Rating* Typical DC Cold 2 2 Number Vac Vdc (amps) AC/DC I t (A S) DC*** Drop (V) UR ResistanceCSA cURus ()** 3216FF250-R 32 63 50 3.5000 0.00038 1.40 X X 3216FF375-R 32 63 50 1.7500 0.00077 0.73 X X 3216FF500-R 32 63 50 0.9800 0.00190 0.66 X X 3216FF750-R 32 63 50 0.5400 0.0053 0.63 X X 3216FF1-R 32 63 50 0.2190 0.030 0.20 X X 3216FF1.25-R 32 63 50 0.1700 0.046 0.18 X X 3216FF1.5-R 32 63 50 0.1190 0.093 0.18 X X 3216FF2-R 32 63 50 0.0660 0.126 0.16 X X 3216FF2.5-R 32 63 50 0.0460 0.260 0.14 X X 3216FF3-R 32 63 50 0.0360 0.275 0.13 X X 3216FF4-R 32 32 50 0.0180 0.337 0.11 X X 3216FF4.5-R 32 32 50 0.0160 0.405 0.10 X X 3216FF5-R 32 32 50 0.0140 0.534 0.09 X X 3216FF6.5-R 32 32 50 0.0086 2.294 0.076 X X 3216FF7-R 32 32 50 0.0070 3.623 0.078 X X 3216FF10-R 24 150 0.0045 2.0 0.062 X X 3216FF12-R 24 150 0.0039 7.0 0.070 X X 3216FF15-R 24 150 0.0031 25.5 0.066 X X 3216FF20-R 24 150 0.0018 48.6 0.060 X X 3216FF25-R 24 250 0.0014 32.0 0.057 X X 3216FF30-R 24 300 0.0012 43.0 0.068 X X *AC Interrupting Rating measured at rated voltage with a unity power factor DC Interrupting Rating measured at rated voltage, time constant of less than 50 microseconds, battery source **Typical DC Cold Resistance measured at 10% of rated current ***Typical Melting I2t measured with a battery bank at rated DC voltage, 10x-rated current, not to exceed IR, time constant of calibrated circuit less than 50 microseconds (6.5A - 30A measured at interrupting rating) Typical Voltage Drop measured at rated current after temperature stabilizes. It is recommended that fuses be mounted with ceramic (white) side facing up. Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is recommended, with further derating required at elevated ambient temperatures.3216FF Technical Data 3001 Effective May 2017 Fast-acting Chip surface mount fuse Time-Current Curve Dimension - mm/inches Drawing Not to Scale Recommended Pad Layout - mm (in) Current in Amps Packaging Packaging Code Pre x Description TR 3000 fuses on 8mm tape-and-reel on a 7 inch (178mm) reel per EIA Standard RS481 Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics 2017 Eaton Eaton is a registered trademark. All Rights Reserved Printed in USA All other trademarks are property Publication No. 3001 BU-SB11302 of their respective owners. October 2017 Time in Seconds 0.25A 0.375A 0.5A 0.75A 1A 1.5A 2A 2.5A 3A 4A 4.5A 5A 6.5A 7A 10A 12A 15A 20A 25A 30A