IRS2001MTRPBF Infineon

Not recommended for new designs. For new designs we recommend IRS2005M May 14, 2012 IRS2001MPBF HIGH AND LOW SIDE DRIVER Product Summary Features Floating channel designed for bootstrap operation Topology General Driver Fully operational to +200V Tolerant to negative transient voltage, dV/dt immune V 200V OFFSET Gate drive supply range from 10V to 20V V 10V 20V OUT Undervoltage lockout 3.3V, 5V, and 15V logic compatible I & I (typical) 290mA & 600mA o+ o- Cross-conduction prevention logic Matched propagation delay for both channels t & t (typical) 160ns & 150ns on off Outputs in phase with inputs Delay Matching (Max.) 50ns Leadfree, RoHS compliant Description Package Options The IRS2001 is a high voltage, high speed power MOSFET and IGBT driver with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross- MLPQ4x4 - 16 Leads conduction. The floating channel can be used to drive (Without 2 leads) an N-channel power MOSFET or IGBT in the high side configuration which operates up to 200V. Typical Connection * Qualification standards can be found on IRs web site www.irf.com 2008 International Rectifier Not recommended for new designs. For new designs we recommend IRS2005M IRS2001MPBF Qualification Information Industrial (per JEDEC JESD 47) Qualification Level Comments: This IC has passed JEDECs Industrial qualification. IRs Consumer qualification level is granted by extension of the higher Industrial level. MSL2 Moisture Sensitivity Level MLPQ4x4 14L (per IPC/JEDEC J-STD-020) Class A (+/-200V) Machine Model (per JEDEC standard JESD22-A115A) Class 1C (+/-2000V) ESD Human Body Model (per JEDEC standard JESD22-A114F) Class III (+/-1000V) Charged Device Model (per JEDEC standard JESD22-C101D) IC Latch-Up Test Class II, Level B (per AEC-Q100-004) Yes RoHS Compliant Qualification standards can be found at International Rectifiers web site