TLE92104131QXXUMA1 Infineon

TLE92104-131 Multiple MOSFET Driver IC 1 Overview Features Four half-bridge gate drivers for external N-channel MOSFETs Control of reverse battery protection MOSFET Adaptive MOSFET gate control Improved electromagnetic emission Reduced switching losses in PWM mode 24-bit Serial Peripheral Interface One current sense amplifier with configurable gain High-side and low-side capable for protection and diagnosis Drain-source monitoring for short circuit detection Overtemperature warning and shutdown Timeout watchdog Detailed off-state diagnostic (open load, short circuit to battery or short circuit to GND) via SPI Three PWM inputs High-side and low-side PWM capable Active free-wheeling Up to 25 kHz PWM frequency Low current consumption in sleep mode Leadless power package with support of optical lead tip inspection Green Product (RoHS compliant) AEC Qualified Potential applications Seat control and extended functions (steering column adjustment, gas pedal adjustment) Central door lock Body control module (cargo cover, washer pump, window lift, rear wiper ...) Product validation Qualified for automotive applications. Product validation according to AEC-Q100. Datasheet Rev. 1.0 www.infineon.com 1 2020-09-21 TLE92104-131 Multiple MOSFET Driver IC Overview Description The TLE92104-131 is a Multi-MOSFET driver IC dedicated to control up to eight n-channel MOSFETs. It includes four half-bridges for DC motor control applications such as automotive power seat control or other applications. A 24-bit Serial Peripheral Interface (SPI) is used to configure the TLE92104-131 and to control the half-bridges. It also allows the read out of the status registers for diagnostic purpose. The TLE92104-131 offers a wide range of diagnostic features such as the monitoring of the supply voltage, the charge pump voltage, temperature warning and over-temperature shutdown. Each gate driver monitors independently its external MOSFET drain-source voltage for fault conditions. The device is housed in a VQFN-48 with exposed pad supporting lead tip inspection. The package provides a good thermal performance and minimizes the required PCB space. Type Package Marking TLE92104-131 PG-VQFN-48 TLE92104-131QX Datasheet 2 Rev. 1.0 2020-09-21