L-1334IT Kingbright

T-1 (3mm) CYLINDRICAL LED LAMP L-1334IT HIGH EFFICIENCY RED Description Features The High Efficiency Red source color devices are WIDE VIEWING ANGLE. made with Gallium Arsenide Phosphide on Gallium LOW POWER CONSUMPTION. Phosphide Orange Light Emitting Diode. RELIABLE AND RUGGED. LONG LIFE-SOLID STATE RELIABILITY. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAD0485 REV NO: V.2 DATE:DEC/18/2004 PAGE: 1 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.CHENGSelection Guide Iv (mcd) V i e w i n g 10mA Angle Part No. Dice Lens Type Min. Typ. 2 1/2 L-1334IT HIGH EFFICIENCY RED (GaAsP/GaP) RED TRANSPARENT 3 5 130 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength High Efficiency Red 6 2 7 n m IF=20mA Dominant Wavelength High Efficiency Red 6 2 5 n m IF=20mA D Spectral Line Half-width High Efficiency Red 4 5 n m IF=20mA 1/2 C Capacitance High Efficiency Red 1 5 p F VF=0V f=1MHz VF Forward Voltage High Efficiency Red 2 . 0 2 . 5 V IF=20mA IR Reverse Current High Efficiency Red 1 0 u A VR = 5V Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red U n i ts Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current 1 160 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAD0485 REV NO: V.2 DATE:DEC/18/2004 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.CHENG