L-813SRC-E Kingbright

10mm SOLID STATE LAMP WP813SRC/E SUPER BRIGHT RED Features Description z10mm DIAMETER BIG LAMP. The Super Bright Red source color devices are made zI.C. COMPATIBLE. with Gallium Aluminum Arsenide Red Light Emitting zRELIABLE AND RUGGED. Diode. zLONG LIFE - SOLID STATE RELIABILITY. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2471 REV NO: V.1 DATE: APR/19/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1101007645Selection Guide Iv (mcd) Viewing 20mA Angle Part No. Dice Lens Type Min. Typ. 2 1/2 WP813SRC/E SURPER BRIGHT RED (GaAIAs) WATER CLEAR 1800 2700 40 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Super Bright Red 660 nm IF=20mA D Dominant Wavelength Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA 1/2 C Capacitance Super Bright Red 95 pF VF=0V f=1MHz VF Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current 1 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2471 REV NO: V.1 DATE: APR/19/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1101007645