L-816BSRC-B Kingbright

10mm ROUND, BLINKING LED LAMP PRELIMINARY SPEC Part Number: L-816BSRC-B SUPER BRIGHT RED Features Description 10mm DIAMETER BIG LAMP WITH BUILT-IN The Super Bright Red source color devices are made with BLINKING IC. Gallium Aluminum Arsenide Red Light Emitting Diode. OPERATION VOLTAGE FROM 3.5V to 14V. BLINKING FREQUENCY FROM 3.0Hz to 1.5Hz. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAE0974 REV NO: V.5 DATE: APR/17/2007 PAGE: 1 OF 3 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU Selection Guide Iv (mcd) Viewing V=9V Angle Part No. Dice Lens Type Min. Typ. 2 1/2 L-816BSRC-B SUPER BRIGHT RED (GaAIAs) WATER CLEAR 110 400 15 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Min. Typ. Units Test Conditions Max. peak Peak Wavelength Super Bright Red 660 nm D Dominant Wavelength Super Bright Red 640 nm 1/2 Spectral Line Half-width Super Bright Red 20 nm Min:VF=3.5V IF Forward Current Super Bright Red 8 22 mA Typ:VF=5V ISON Supply Current Super Bright Red 8 mA VF = 3.5V ISON Supply Current Super Bright Red 44 mA VF = 14V f Blink Frequency Super Bright Red 1.5 3 Hz VF = 3.5V ~ 14V Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 310 mW Forward Voltage 14 V Reverse Voltage 0.5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature 1 260C For 3 Seconds Lead Solder Temperature 2 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAE0974 REV NO: V.5 DATE: APR/17/2007 PAGE: 2 OF 3 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU