VD90.5105 Martin SMT

MATERIAL SAFETY DATA SHEET ACCORDING TO 91/155/EWG Tradename: VD90.5101 / VD90.5104 / VD90.5105 / VD90.5106 / VD90.5108 / VD90.5109 / VD90.5110 / VD90.5115 - MARTIN Solder Balls (LF) Issue July. 2013 Reference: MSDS Lotkugeln SnAgCu (LF)-e.doc 1. Identification of the substance/preparation and of the company 1.1 Identification of the substance/preparation MARTIN Solder Balls lead free Alloy: Sn96.5 Ag3 Cu0.5 1.2 Company/undertaking identification MARTIN GmbH Argelsrieder Feld 1b D-82234 Wessling Phone: +49-8153-932 93-0 Fax: +49-8153-932 93-9 www.martin-smt.de 1.3 Emergency telephone Please contact the nearest poison emergency center. 2. Hazards identification 2.1 To people See point 11 and 15. Preparation is not classified as hazardous in the sense of directive 1999/45EC. In the event of contact with the hot product: Danger of burns. 2.2 To the environment See point 12. 3. Composition and ingredients 3.1 Alloy containing: Name Symbol CAS No. EINECS Content % Tin Sn 7440-31-5 231-141-8 Balance Silver Ag 7440-22-4 231-131-3 3.0-4.0 Copper Cu 7440-50-8 231 -159-6 0.4-0.6 For complete wording of the R-phrases refer to point 15. 4. First aid procedure 4.1 After inhalation During processing: Supply person with fresh air. Call doctor immediately. 4.2 After eye contact In the event of contact with the hot product: Wash thoroughly for several minutes using copious water. Seek medical help if necessary. Martin GmbH Amtsgericht Mnchen VR-Bank Sta-Hg-Lbg Fon +49 0 8153 9329-30 D-82234 Wessling / Germany Ust.-Id.-Nr. DE 128 235 758 Konto 655 67 87 info martin-smt.de Geschftsfhrer / General Manager WEEE-Nr. DE 22908382 BIC GEN0DEF1STH www.martin-smt.de Dr. Georg Baumann IBAN DE 15700932000006556787 Dipl.-Ing Felix Frischkorn Dipl.-Ing. Gunter Krbis Page 1 of 6 MATERIAL SAFETY DATA SHEET ACCORDING TO 91/155/EWG Tradename: VD90.5101 / VD90.5104 / VD90.5105 / VD90.5106 / VD90.5108 / VD90.5109 / VD90.5110 / VD90.5115 - MARTIN Solder Balls (LF) Issue July. 2013 Reference: MSDS Lotkugeln SnAgCu (LF)-e.doc 4.3 After skin contact In the event of contact with the hot product: Wash off with cold water. Do not attempt to remove hardened product. 4.4 After ingestion Call doctor immediately - Have data sheet available. 4.6 Special resources necessary for first aid n.g. 5. Fire fighting measures 5.1 Suitable extinguishers Adapt to the nature and extent of fire. If applicable: Metal fire extinguisher. 5.2 Unsuitable extinguishers n.g. 5.3 Severe Dangers from this material, products of burning or heating In case of fire the following can develop: Fume irritating gases. 5.4 Special protective Equipment Protective respirator with independent air supply. According to size of fire: Full protection if necessary. 5.5 Further Information Dispose of contaminated extinction water according to official regulations. 6. Accidental release measures Refer to point 13 and for personal protection refer to point 8. 6.1 Personal precautions No special measures required. 6.2 Environmental measures Prevent from entering drainage system. 6.3 Methods for cleaning up Collect mechanically and dispose of according to point 13. Allow the hot product to solidity. 7. Handling and storage 7.1 Handling Tips for safe handling: See point 6.1. General hygiene measures for the handling of chemicals are applicable. Suction measures at the workplace or on the processing machines required. Observe directions on label and instructions for use. Switch on available suction system. Do not inhale dust / fume / mist. 7.2 Storage Martin GmbH Amtsgericht Mnchen VR-Bank Sta-Hg-Lbg Fon +49 0 8153 9329-30 D-82234 Wessling / Germany Ust.-Id.-Nr. DE 128 235 758 Konto 655 67 87 info martin-smt.de Geschftsfhrer / General Manager WEEE-Nr. DE 22908382 BIC GEN0DEF1STH www.martin-smt.de Dr. Georg Baumann IBAN DE 15700932000006556787 Dipl.-Ing Felix Frischkorn Dipl.-Ing. Gunter Krbis Page 2 of 6