MP2158GQH-Z

MP2158 1A, 6V, 1.5MHz, 17 A I , COT Q Synchronous Step Down Switcher In Ultra-small 2x1.5mm QFN The Future of Analog IC Technology DESCRIPTION FEATURES The MP2158 is a monolithic step-down switch Very Low I : 17 A Q mode converter with built-in internal power Default 1.5MHz Switching Frequency MOSFETs. It achieves 1A continuous output EN and Power Good for Power Sequencing current from a 2.5V to 6V input voltage with Ultra-small 2.0x1.5mm QFN8 Package excellent load and line regulation. The output Wide 2.5V to 6V Operating Input Range voltage can be regulated as low as 0.6V. Output Adjustable from 0.6V Up to 1A Output Current The Constant-On-Time control scheme provides fast transient response and eases loop 100% Duty Cycle in Dropout stabilization. Fault condition protection includes 118m and 88m Internal Power MOSFET Switches cycle-by-cycle current limiting and thermal shutdown. Cycle-by-Cycle Over Current Protection Short Circuit Protect with Hiccup Mode The MP2158 is available in the small QFN8 Stable with Low ESR Output Ceramic 2.0x1.5mm package and requires a minimum Capacitors number of readily available standard external components. APPLICATIONS The MP2158 is ideal for a wide range of Wireless/Networking Cards applications including High Performance DSPs, Portable Instruments FPGAs, PDAs, and portable instruments. Battery Powered Devices Low Voltage I/O System Power All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. MPS and The Future of Analog IC Technology are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION L1 VIN VOUT 2.5V to 6V 1 H 1.2V/1A SW VIN C1 OUT C2 10 F 10 F R1 MP2158 200k EN EN FB R2 PG PG 200k AGND PGND MP2158 Rev. 1.03 www.MonolithicPower.com 1 7/5/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2016 MPS. All Rights Reserved. MP2158 1A, 6V, 1.5MHz SYNCHRONOUS STEP-DOWN SWITCHER ORDERING INFORMATION Part Number* Package Top Marking MP2158GQH QFN-8 (2.0mmx1.5mm) See Below * For Tape & Reel, add suffix Z (e.g. MP2158GQHZ); TOP MARKING BE: product code of MP2158GQH; LL: lot number; PACKAGE REFERENCE TOP VIEW 1 EN 8 PG 2 7 FB VIN AGND 3 6 SW OUT 4 5 PGND QFN-8 (2.0mmx1.5mm) (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC Supply Voltage V ...................................... 6.5V QFN-8 (2.0mmx1.5mm)......... 110..... 55... C/W IN V ...................................................................... SW Notes: -0.3V (-1.5V for <20ns&-4V for <8ns) to 6.5V 1) Exceeding these ratings may damage the device. (10V for <10ns) 2) The maximum allowable power dissipation is a function of the (MAX), the junction-to- maximum junction temperature T All Other Pins................................-0.3V to 6.5 V J ambient thermal resistance , and the ambient temperature JA Junction Temperature...............................150C T . The maximum allowable continuous power dissipation at A any ambient temperature is calculated by P (MAX) = (T Lead Temperature ....................................260C D J (MAX)-T )/ . Exceeding the maximum allowable power (2) A JA Continuous Power Dissipation (T = +25C) A dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal ... ............................................... 1.14W shutdown circuitry protects the device from permanent Storage Temperature............... -65C to +150 C damage. 3) The device is not guaranteed to function outside of its (3) operating conditions. Recommended Operating Conditions 4) Measured on JESD51-7, 4-layer PCB. Supply Voltage V .............................2.5V to 6V IN Operating Junction Temp. (T ). -40C to +125C J MP2158 Rev. 1.03 www.MonolithicPower.com 2 7/5/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2016 MPS. All Rights Reserved.