RFM products are now Murata products. SF2160E RF SAW Filter, 2330 MHz, 60 MHz BW Pb 3.0 x 3.0 x 1.4 mm Surface-mount Case Complies with Directive 2002/95/EC (RoHS) 2330 MHz SAW Filter Absolute Maximum Ratings Rating Value Units Input Power +10 dBm DC Voltage on any Non-ground Terminal 3 V Operating Temperature Range -40 to +85 C Component Storage Temperature Range -50 to +95 C Storage Temperature Range in Tape and Reel -40 to +85 C C Maximum Soldering Profile, 5 Cycles/10 seconds Maximum 265 SM3030-6 Electrical Characteristics Characteristic Sym Notes Min Typ Max Units Center Frequency f 2330 MHz C Insertion Loss 2300 to 2360 MHz IL 2.4 3.2 dB Amplitude Ripple: 2300 to 2360 MHz 1.1 2 2300 to 2320 MHz 0.3 1 dB 2320 to 2340 MHz 0.6 1 2340 to 2360 MHz 0.5 1 Return Loss 2300 to 2360 MHz 9 9.5 dB Attenuation Referenced to 0 dB: DC to 2085 MHz 25 30 2097 to 2235 MHz 25 36 dB 2235 to 2256 MHz 15 29 Case Style SM3030-6 3 x 3 x 1.4 mm Surface-Mount Lid Symbolization, Y=year, WW=week, S=shift, See note 4 826 // YWWS Electrical Connections Connection Terminals Input 2 Output 5 Ground All others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. NOTES: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4.LRI or after the part number indicateslow rate initial productio andEN or indicatesengineering prototypes 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 2010-2014 by Murata Electronics N.A., Inc. SF2160E (R) 3/12/14 Page 1 of 6 www.murata.comTesting Environment Frequency Response 2010-2014 by Murata Electronics N.A., Inc. www.murata.com SF2160E (R) 3/12/14 Page 2 of 6