ALUMINUM ELECTROLYTIC CAPACITORS Miniature Sized, High Ripple Current High Reliability PB series High ripple current load life of 5000 / 7000 hours at +105C. Suited for ballast application. Compliant to the RoHS directive (2002/95/EC). CA Long Life PB Products which are scheduled to be discontinued. Not recommended for new designs Smaller PT Specifications Item Performance Characteristics Category Temperature Range 40 to +105C (10 to 50V), 25 to +105C (160 to 450V) Rated Voltage Range 10 to 450V Rated Capacitance Range 0.47 to 3300F Capacitance Tolerance 20% at 120Hz, 20C Rated Voltage (V) 10 to 50V 160 to 450V After 2 minutes application of rated After 2 minutes application of rated Leakage Current voltage, leakage current is not more than voltage, leakage current is not more than 0.01CV or 3 (A) , whichever is greater. 0.06CV+10 (A) . Measurement frequency : 120Hz at 20C Rated voltage (V) 10 16 25 35 50 160 200 250 350 400 450 Tangent of loss angle (tan ) tan (MAX.) 0.30 0.25 0.22 0.18 0.15 0.15 0.15 0.15 0.20 0.24 0.24 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature 10 16 25 35 50 160 200 250 350 400 450 Impedance ratio ZT / Z20 (MAX.) Z25C / Z+20C 3 2 2 2 2 3 3 3 4 6 6 The specifications listed at right shall be met when the Within 30% of the initial capacitance value (10 to 50V) Capacitance change C Within 20% of the initial capacitance value (160 to 450V) capacitors are restored to 20 after D.C. bias plus Endurance rated ripple current is applied for 5000 hours (7000 300% or less than the initial specified value (10 to 50V) tan C 200% or less than the initial specified value (160 to 450V) hours for D=10 and 12.5 (10 to 50V)) at 105 , the peak voltage shall not exceed the rated voltage. Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C Shelf Life 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Radial Lead Type Type numbering system (Example : 160V 22F) ( ) Sleeve P.E.T. d 1 2 3 4 5 6 7 8 9 10 11 12 U P B 2 C 2 2 0 M P D Size code Configuration Capacitance tolerance (20%) Rated capacitance (22F) Pressure + MAX MIN MIN relief vent 15 4 Rated voltage (160V) L (6.3up) Series name Type (mm) Configuration D 5 6.3 8 10 12.5 16 18 22 25 Pb-free leadwire D Pb-free PET sleeve P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10.0 12.5 5 DD d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 1.0 1.0 6.3 ED 0.50.5 0.50.5 0.50.5 0.50.5 0.50.5 0.5 0.5 1.0 1.0 8 10 PD 12.5 to 18 HD 22 25 RD (D 18) 1.5 (D 22) 2.0 Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100B + MAX D 0.5 PALUMINUM ELECTROLYTIC CAPACITORS PB series Dimensions V 10 16 25 35 50 Cap.(F) 1A 1C 1E 1V 1H Code 0.47 R47 5 11 5 1 010 5 11 10 2.2 2R2 5 11 15 3R3 5 11 3.3 20 4R7 5 11 25 4.7 100 5 11 30 10 220 5 11 40 22 330 5 11 50 6.3 11 55 33 47 470 5 11 55 6.3 11 60 6.3 11 65 100 101 5 11 70 6.3 11 85 6.3 11 95 8 11.5 100 8 11.5 100 220 221 6.3 11 100 8 11.5 130 8 11.5 195 10 12.5 200 10 16 235 330 331 8 11.5 150 8 11.5 195 10 12.5 255 10 16 280 10 20 295 470 471 8 11.5 180 10 12.5 270 10 16 325 10 20 350 12.5 20 370 1000 102 10 16 350 10 20 430 12.5 20 500 12.5 25 570 2200 222 12.5 20 550 12.5 25 710 Rated Case size D L(mm) 3300 332 12.5 25 810 ripple Rated ripple current (mArms) at 105C 120Hz V 160 200 250 350 400 450 Cap.(F) 2G Code 2C 2D 2E 2V 2W 125 125 150 10 100 10 20 10 20 12.5 20 250 250 300 250 250 300 175 200 275 22 220 10 20 10 20 12.5 20 12.5 20 12.5 25 16 25 500 500 600 350 400 550 250 300 300 250 300 350 33 330 10 20 12.5 20 12.5 20 16 20 16 25 18 25 500 600 600 500 600 700 300 300 350 325 375 425 47 470 12.5 20 12.5 20 12.5 25 16 25 18 25 18 31.5 600 600 700 650 750 850 475 56 560 18 35.5 950 375 375 500 400 450 500 12.5 25 12.5 25 16 25 68 680 18 25 18 31.5 18 40 750 750 1000 800 900 1000 500 550 82 820 18 35.5 22 40 1000 1100 550 550 600 500 550 100 101 16 25 16 25 18 25 18 31.5 18 40 1100 1100 1200 1000 1100 575 600 700 22 50 120 121 18 35.5 22 40 1150 1200 1400 25 40 650 650 750 650 800 150 151 18 25 18 25 18 31.5 18 40 25 50 1300 1300 1500 1300 1600 850 750 800 22 50 180 181 18 35.5 22 40 1700 1500 1600 25 40 850 950 900 220 221 18 31.5 18 40 25 50 1700 1900 1800 950 1050 950 22 50 18 31.5 22 40 270 271 1900 2100 25 40 1900 850 1050 1050 330 331 18 31.5 18 40 25 50 1700 2100 2100 950 1150 22 50 1150 390 391 18 35.5 22 40 1900 2300 25 40 2300 1050 1400 470 471 18 40 25 50 2100 2800 1150 22 50 1350 560 561 22 40 2300 25 40 2700 22 50 1350 1500 680 681 25 50 25 40 2700 3000 1500 Rated Case size 25 50 820 821 D L(mm) 3000 ripple Rated ripple current (mArms) at 105C 120Hz : Frequency coefficient of rated ripple current Rated ripple current (mArms) at 105C 100kHz : Frequency V 50Hz 120Hz 300Hz 1kHz 10k to 50kHz 100kHz or more Cap.(F) : In this case, 6 will be put at 12th digit of type 0.47 to 100 0.75 1.00 1.20 1.40 1.55 1.65 numbering system. 10 to 50 0022 to 4700 0.85 1.00 1.10 1.20 1.25 1.30 1000 to 3300 0.95 1.00 1.03 1.05 1.10 1.15 Wider range of rating. 160 to 450 010 to 820 0.60 1.00 1.20 1.60 1.80 2.00 CAT.8100B