Freescale Semiconductor, Inc. K22P64M120SF5V2 Data Sheet: Technical Data Rev 5, 03/2015 Kinetis K22F Sub-Family Data MK22FX512AVLH12 MK22FN1M0AVLH12 Sheet 120 MHz ARM Cortex-M4-based Microcontroller with FPU The K22 product family members are optimized for cost-sensitive applications requiring low-power, USB connectivity, processing efficiency with floating point unit. It shares the comprehensive enablement and scalability of the Kinetis family. This product offers: Up to 1 MB of flash memory with up to 128 KB of SRAM Small package with high memory density 64 LQFP Run power consumption down to 279 A/MHz. Static 10 x 10 x 1.4 mm Pitch 0.5 mm power consumption down to 5.1 A with full state retention and 5 s wakeup. Lowest Static mode down to 268 nA USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO voltage regulator Performance Communication interfaces Up to 120 MHz ARM Cortex-M4-based core with DSP USB full-/low-speed On-the-Go controller instructions delivering 1.25 Dhrystone MIPS per MHz USB Device Charger detect Controller Area Network (CAN) module Memories and memory interfaces Three SPI modules Up to 1 MB program flash memory and 128 KB RAM Three I2C modules 4 KB FlexRAM and 128 KB FlexNVM on FlexMemory Six UART modules devices Secure Digital host controller (SDHC) FlexBus external bus interface I2S module System peripherals Timers Multiple low-power modes low leakage wakeup unit Two 8-channel Flex-Timers (PWM/Motor Control) Memory protection unit with multi-master protection Two 2-channel Flex-Timers (PWM/Quad Decoder) 16-channel DMA controller Periodic interrupt timers and 16-bit low-power timer External watchdog monitor and software watchdog Carrier modulator transmitter Real-time clock Security and integrity modules Programmable delay block Hardware CRC module 128-bit unique identification (ID) number per chip Clocks 3 to 32 MHz and 32 kHz crystal oscillator Analog modules PLL, FLL, and multiple internal oscillators Two 16-bit SAR ADCs One 12-bit DAC Operating Characteristics Three analog comparators (CMP) Voltage range: 1.71 to 3.6 V Voltage reference Flash write voltage range: 1.71 to 3.6 V Temperature range (ambient): 40 to 105C Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. 20132014 Freescale Semiconductor, Inc. All rights reserved.1 Ordering Information Part Number Memory Maximum number of I O s Flash (KB) SRAM (KB) MK22FX512AVLH12 512 KB 128 40 MK22FN1M0AVLH12 1 MB 128 40 1. To confirm current availability of ordererable part numbers, go to