NXP Semiconductors K24P144M120SF5 Data Sheet: Technical Data Rev. 7, 11/2016 Kinetis K24F Sub-Family Data MK24FN1M0VLQ12 MK24FN1M0VLL12 Sheet MK24FN1M0VDC12 120 MHz ARM Cortex-M4-based Microcontroller with FPU The K24 product family members are optimized for cost-sensitive applications requiring low-power, USB connectivity, and up to 256 KB of embedded SRAM. These devices share the comprehensive enablement and scalability of the Kinetis family. 121 XFBGA 144 LQFP 8 x 8 x 0.5 mm Pitch 20 x 20 x 1.6 mm Pitch This product offers: 0.65 mm 0.5 mm Run power consumption down to 250 A/MHz. Static power consumption down to 5.8 A with full state retention and 5 s wakeup. Lowest Static mode down to 339 nA USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO Vreg, with USB device crystal-less operation 100 QFP 14 x 14 x 1.7 mm Pitch 0.5 mm Performance Communication interfaces Up to 120 MHz ARM Cortex-M4 core with DSP USB full-/low-speed On-the-Go controller instructions and floating point unit Controller Area Network (CAN) module Three SPI modules Memories and memory interfaces Three I2C modules. Support for up to 1 Mbit/s Up to 1 MB program flash memory and 256 KB RAM Six UART modules FlexBus external bus interface Secure Digital Host Controller (SDHC) I2S module System peripherals Multiple low-power modes, low-leakage wake-up unit Timers Memory protection unit with multi-master protection Two 8-channel Flex-Timers (PWM/Motor control) 16-channel DMA controller Two 2-channel FlexTimers (PWM/Quad decoder) External watchdog monitor and software watchdog 32-bit PITs and 16-bit low-power timers Real-time clock Security and integrity modules Programmable delay block Hardware CRC module Hardware random-number generator Clocks Hardware encryption supporting DES, 3DES, AES, 3 to 32 MHz and 32 kHz crystal oscillator MD5, SHA-1, and SHA-256 algorithms PLL, FLL, and multiple internal oscillators 128-bit unique identification (ID) number per chip 48 MHz Internal Reference Clock (IRC48M) Analog modules Operating Characteristics Two 16-bit SAR ADCs Voltage range: 1.71 to 3.6 V Two 12-bit DACs Flash write voltage range: 1.71 to 3.6 V Three analog comparators (CMP) Temperature range (ambient): 40 to 105C Voltage reference NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its products.Ordering Information 1 Part Number Memory Maximum number of I O s Flash (KB) SRAM (KB) MK24FN1M0VLL12 1 MB 256 66 MK24FN1M0VDC12 1 MB 256 83 MK24FN1M0VLQ12 1 MB 256 100 1. To confirm current availability of ordererable part numbers, go to