MK66FN2M0VMD18 NXP

NXP Semiconductors K66P144M180SF5V2 Data Sheet: Technical Data Rev. 4, 04/2017 Kinetis K66 Sub-Family MK66FN2M0VMD18 180 MHz ARM Cortex-M4F Microcontroller. MK66FX1M0VMD18 MK66FN2M0VLQ18 MK66FX1M0VLQ18 The K66 sub-family members provide greater performance, memory options up to 2 MB total flash and 256 KB of SRAM, as well as higher peripheral integration with features such as Dual USB and a 10/100 Mbit/s Ethernet MAC. These devices maintain hardware and software compatibility with the existing Kinetis family. This product also offers: Integration of a High Speed USB Physical Transceiver Greater performance flexibility with a High Speed Run mode Smarter peripherals with operation in Stop modes 144 MAPBGA (MD) 144 LQFP (LQ) 13 mm x 13 mm Pitch 1 20 mm x 20 mm Pitch mm 0.5 mm Performance Memories and memory expansion Up to 180 MHz ARM Cortex-M4 based core with DSP Up to 2 MB program flash memory on non- instructions and Single Precision Floating Point unit FlexMemory devices with 256 KB RAM Up to 1 MB program flash memory and 256 KB of System and Clocks FlexNVM on FlexMemory devices Multiple low-power modes to provide power 4 KB FlexRAM on FlexMemory devices optimization based on application requirements FlexBus external bus interface and SDRAM controller Memory protection unit with multi-master protection 3 to 32 MHz main crystal oscillator Analog modules 32 kHz low power crystal oscillator Two 16-bit SAR ADCs and two 12-bit DAC 48 MHz internal reference Four analog comparators (CMP) containing a 6-bit DAC and programmable reference input Security Voltage reference 1.2V Hardware random-number generator Supports DES, AES, SHA accelerator (CAU) Communication interfaces Multiple levels of embedded flash security Ethernet controller with MII and RMII interface to external PHY and hardware IEEE 1588 capability Timers USB high-/full-/low-speed On-the-Go with on-chip Four Periodic interrupt timers high speed transceiver 16-bit low-power timer USB full-/low-speed OTG with on-chip transceiver Two 16-bit low-power timer PWM modules Two CAN, three SPI and four I2C modules Two 8-channel motor control/general purpose/PWM Low Power Universal Asynchronous Receiver/ timers Transmitter 0 (LPUART0) and five standard UARTs Two 2-ch quad decoder/general purpose timers Secure Digital Host Controller (SDHC) Real-time clock I2S module Human-machine interface Operating Characteristics Low-power hardware touch sensor interface (TSI) Voltage/Flash write voltage range:1.71 to 3.6 V General-purpose input/output Temperature range (ambient): -40 to 105C NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its products.Ordering Information 1 Part Number Memory Maximum number of I O s Flash SRAM MK66FN2M0VMD18 2 MB 256 KB 100 MK66FX1M0VMD18 1.25 MB 256 KB 100 MK66FN2M0VLQ18 2 MB 256 KB 100 MK66FX1M0VLQ18 1.25 MB 256 KB 100 1. To confirm current availability of orderable part numbers, go to