NTS0104PW-Q100J

NTS0104-Q100 Dual supply translating transceiver open drain auto direction sensing Rev. 2 23 May 2013 Product data sheet 1. General description The NTS0104-Q100 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (V CC(A) and V ). V can be supplied with any voltage between 1.65 V and 3.6 V. V can CC(B) CC(A) CC(B) be supplied with any voltage between 2.3 V and 5.5 V. The range in supply voltages makes the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to V and pins Bn are referenced to CC(A) V . A LOW level at pin OE causes the outputs to assume a high-impedance CC(B) OFF-state. This device is fully specified for partial power-down applications using I . OFF The I circuitry disables the output, preventing the damaging backflow current through OFF the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from 40 C to +85 C and from 40 C to +125 C Wide supply voltage range: V : 1.65 V to 3.6 V and V : 2.3 V to 5.5 V CC(A) CC(B) Maximum data rates: Push-pull: 50 Mbps I circuitry provides partial Power-down mode operation OFF Inputs accept voltages up to 5.5 V ESD protection: MIL-STD-883, method 3015 Class 2 exceeds 2500 V for A port MIL-STD-883, method 3015 Class 3B exceeds 15000 V for B port HBM JESD22-A114E Class 2 exceeds 2500 V for A port HBM JESD22-A114E Class 3B exceeds 15000 V for B port MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 ) Latch-up performance exceeds 100 mA per JESD 78B Class II Multiple package optionsNTS0104-Q100 NXP Semiconductors Dual supply translating transceiver open drain auto direction sensing 3. Applications 2 I C/SMBus UART GPIO 4. Ordering information Table 1. Ordering information Type number Package Temperature Name Description Version range NTS0104PW-Q100 40 Cto +125 C TSSOP14 plastic thin shrink small outline package SOT402-1 14 leads body width 4.4 mm NTS0104BQ-Q100 40 Cto +125 C DHVQFN14 plastic dual in-line compatible thermal SOT762-1 enhanced very thin quad flat package no leads 14 terminals body 2.5 3 0.85 mm NTS0104UK-Q100 40 C to +125 C WLCSP12 wafer level chip-size package, 12 bumps body NTS0104UK-Q100 1.20 1.60 0.56 mm (Backside Coating included) 5. Marking Table 2. Marking Type number Marking code NTS0104PW-Q100 NTS0104 NTS0104BQ-Q100 S0104 NTS0104UK-Q100 s04 NTS0104 Q100 All information provided in this document is subject to legal disclaimers. NXP B.V. 2013. All rights reserved. Product data sheet Rev. 2 23 May 2013 2 of 24