Surface Mount Schottky Power Rectifier SMA Power Surface Mount Package MBRA160, NRVBA160, NRVBA160N www.onsemi.com This device employs the Schottky Barrier principle in a large area metaltosilicon power diode. State of the art geometry features epitaxial construction with oxide passivation and metal overlay SCHOTTKY BARRIER contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity diodes in surface mount applications RECTIFIER where compact size and weight are critical to the system. 1.0 AMPERES 60 VOLTS Features Small Compact Surface Mountable Package with JBent Leads Rectangular Package for Automated Handling Highly Stable Oxide Passivated Junction Very Low Forward Voltage Drop SMA Guardring for Stress Protection CASE 403D NRVBA Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements AECQ101 MARKING DIAGRAM Qualified and PPAP Capable* These Devices are PbFree, Halogen Free/BFR Free and are RoHS B16 AYWW Compliant Mechanical Characteristics: B16 = Specific Device Code Case: Epoxy, Molded A = Assembly Location** Weight: 70 mg (Approximately) Y = Year Finish: All External Surfaces Corrosion Resistant and Terminal WW = Work Week = PbFree Package Leads are Readily Solderable (Note: Microdot may be in either location) Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds **The Assembly Location code (A) is front side optional. In cases where the Assembly Location is Shipped in 12 mm tape, 5000 units per 13 inch reel stamped in the package bottom (molding ejecter pin), Polarity: Cathode Lead Indicated by Polarity Band the front side assembly code may be blank. ESD Ratings: ORDERING INFORMATION Machine Model = C Human Body Model = 3B Device Package Shipping SMA MBRA160T3G 5,000 / (PbFree) Tape & Reel NRVBA160T3G* SMA 5,000 / (PbFree) Tape & Reel NRVBA160T3GVF01 SMA 5,000 / (PbFree) Tape & Reel NRVBA160NT3G* SMA 5,000 / (PbFree) Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2013 1 Publication Order Number: December, 2019 Rev. 14 MBRA160T3/DMBRA160, NRVBA160, NRVBA160N MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage V 60 V RRM Working Peak Reverse Voltage V RWM DC Blocking Voltage V R Average Rectified Forward Current I A O (At Rated V , T = 105C) 1.0 R C Average Rectified Forward Current I A O (At Rated V , T = 70C) 2.1 R C NonRepetitive Peak Surge Current I A FSM (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) 60 Storage/Operating Case Temperature T , T 55 to +150 C stg C Operating Junction Temperature (Note 1) T 55 to +150 C J Voltage Rate of Change dv/dt V/ s (Rated V , T = 25C) 10,000 R J Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The heat generated must be less than the thermal conductivity from JunctiontoAmbient: dP /dT < 1/R . D J JA THERMAL CHARACTERISTICS Symbol Value Unit Characteristic Thermal Resistance, JunctiontoLead (Note 2) R 35 C/W JL Thermal Resistance, JunctiontoAmbient (Note 2) R 86 JA 2. Mounted on 2 Square PC Board with 1 Square Total Pad Size, PC Board FR4. ELECTRICAL CHARACTERISTICS Symbol Value Unit Characteristic V T = 25C T = 125C V Maximum Instantaneous Forward Voltage (Note 3) F J J 0.510 0.475 (I = 1.0 A) F I T = 25C T = 125C mA Maximum Instantaneous Reverse Current R J J 0.2 20 (V = 60 V) R Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width 250 s, Duty Cycle 2.0%. www.onsemi.com 2