SA5V0CA ON Semiconductor

SA5V0(C)A - SA170(C)A Transient Voltage Suppressors SA5V0(C)A - SA170(C)A Features Glass passivated junction. 500W Peak Pulse Power capability on 10/1000 s waveform. Excellent clamping capability. Low incremental surge resistance. Fast response time typically less than 1.0 ps from 0 volts to BV for DO-15 COLOR BAND DENOTES CATHODE unidirectional and 5.0 ns for ON UNIDIRECTIONAL DEVICES ONLY. NO bidirectional. COLOR BAND ON BIDIRECTIONAL DEVICES. Typical I less than 1.0 A above 10V. R DEVICES FOR BIPOLAR APPLICATIONS - Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions. 500 Watt Transient Voltage Suppressors Absolute Maximum Ratings* T = 25C unless otherwise noted A Symbol Parameter Value Units P Peak Pulse Power Dissipation on 10/1000 s waveform 500 W PPM I Peak Pulse Current on 10/1000 s waveform see table A PPM P Power Dissipation D 1.0 W .375 lead length T = 75C A I Non-repetitive Peak Forward Surge Current FSM 70 A superimposed on rated load (JEDEC method) (Note 1) Storage Temperature Range -65 to +175 T C stg Operating Junction Temperature + 175 T C J *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave Duty cycle = 4 pulses per minute maximum. SA5V0(C)A - SA170(C)A, Rev. D 2002 Fairchild Semiconductor CorporationSA5V0(C)A - SA170(C)A Transient Voltage Suppressors (continued) Electrical Characteristics T = 25C unless otherwise noted A Uni-directional Reverse Breakdown Voltage Test Clamping Voltage Peak Pulse Reverse Bi-directional (C) Stand-off Voltage V (V) Current I Current Leakage V BR PPM RWM Device V (V) I (mA) V (V) I (A) I (uA)* RWM T C PPM R min max SA5V0(C)A 5.0 6.40 7.00 10 9.2 54.3 600 SA6V0(C)A 6.0 6.67 7.37 10 10.3 48.5 600 SA6V5(C)A 6.5 7.22 7.98 10 11.2 44.7 400 SA7V0(C)A 7.0 7.78 8.60 10 12.0 41.7 150 SA7V5(C)A 7.5 8.33 9.21 1.0 12.9 38.8 50 SA8V0(C)A 8.0 8.89 9.83 1.0 13.6 36.7 25 SA8V5(C)A 8.5 9.44 10.4 1.0 14.4 34.7 10 SA9V0(C)A 9.0 10.0 11.1 1.0 15.4 32.5 5 SA10(C)A 10 11.1 12.3 1.0 17.0 29.4 1 SA11(C)A 11 12.2 13.5 1.0 18.2 27.4 1 SA12(C)A 12 13.3 14.7 1.0 19.9 25.1 1 SA13(C)A 13 14.4 15.9 1.0 21.5 23.2 1 SA14(C)A 14 15.6 17.2 1.0 23.2 21.5 1 SA15(C)A 15 16.7 18.5 1.0 24.4 20.6 1 SA16(C)A 16 17.8 19.7 1.0 26.0 19.2 1 SA17(C)A 17 18.9 20.9 1.0 27.6 18.1 1 SA18(C)A 18 20.0 22.1 1.0 29.2 17.2 1 SA20(C)A 20 22.2 24.5 1.0 32.4 15.4 1 SA22(C)A 22 24.4 26.9 1.0 35.5 14.1 1 SA24(C)A 24 26.7 29.5 1.0 38.9 12.8 1 SA26(C)A 26 28.9 31.9 1.0 42.1 11.9 1 SA28(C)A 28 31.1 34.4 1.0 45.4 11.0 1 SA30(C)A 30 33.3 36.8 1.0 48.4 10.3 1 SA33(C)A 33 36.7 40.6 1.0 53.3 9.4 1 SA36(C)A 36 40.0 44.2 1.0 58.1 8.6 1 SA40(C)A 40 44.4 49.1 1.0 64.5 7.8 1 SA43(C)A 43 47.8 52.8 1.0 69.4 7.2 1 SA45(C)A 45 50.0 55.3 1.0 72.7 6.9 1 SA48(C)A 48 53.3 58.9 1.0 77.4 6.5 1 SA51(C)A 51 56.7 62.7 1.0 82.4 6.1 1 SA54(C)A 54 60.0 66.3 1.0 87.1 5.7 1 SA58(C)A 58 64.4 71.2 1.0 93.6 5.3 1 SA60(C)A 60 66.7 73.7 1.0 96.8 5.2 1 SA64(C)A 64 71.1 78.6 1.0 103.0 4.9 1 SA70(C)A 70 77.8 86.0 1.0 113.0 4.4 1 SA75(C)A 75 83.3 92.1 1.0 121.0 4.1 1 SA78(C)A 78 86.7 95.8 1.0 126.0 4.0 1 SA85(C)A 85 94.4 104.0 1.0 137.0 3.6 1 SA90(C)A 90 100.0 111.0 1.0 146.0 3.4 1 SA100(C)A 100 111.0 123.0 1.0 162.0 3.1 1 SA110(C)A 110 122.0 135.0 1.0 177.0 2.8 1 SA120(C)A 120 133.0 147.0 1.0 193.0 2.7 1 SA130(C)A 130 144.0 159.0 1.0 209.0 2.4 1 SA150(C)A 150 167.0 185.0 1.0 243.0 2.1 1 SA160(C)A 160 178.0 197.0 1.0 259.0 1.9 1 SA170(C)A 170 189.0 209.0 1.0 275.0 1.8 1 * For bidirectional parts with V <10V, the I max limit is doubled. RWM R SA5V0(C)A - SA170(C)A, Rev. D