TCC-106A-RT ON Semiconductor

TCC-106 Six-Output PTIC Control IC Introduction ON Semiconductors PTIC Controller IC is a sixoutput highvoltage digital to analog control IC specifically designed to control and bias ON Semiconductors Passive Tunable Integrated www.onsemi.com Circuits (PTICs). These tunable capacitive circuits are intended for use in mobile phones and dedicated RF tuning applications. The implementation of ONSemiconductors tunable circuits in mobile phones enables significant improvement in terms of antenna radiated performance. The tunable capacitors are controlled through a bias voltage ranging RDL Ball Array from 2 V to 20 V. The TCC106 highvoltage PTIC control IC has CASE 567HL been specifically designed to cover this need, providing six independent highvoltage outputs that control up to six different tunable PTICs in parallel. The device is fully controlled through a MARKING DIAGRAM multiprotocol digital interface. Key Features Controls ON Semiconductors PTIC Tunable Capacitors TC6x Compliant with Timing Needs of Cellular and Other Wireless System ALYW Requirements Integrated Boost Converter with 6 Programmable Outputs (up to 24 V) RDL Low Power Consumption TC6 = Product Code x = MIPI ID Autodetection of SPI (30 or 32bit) or MIPI RFFE Interfaces A = Assembly Location (1.2 V or 1.8 V) L = Wafer Lot Code Available in WLCSP (RDL ball arrays) and for Standalone or Y = Year Code Module Integration W = Week Code O = Pin 1 Marker This is a PbFree Device Typical Applications Multiband, Multistandard, Advanced and Simple Mobile Phones ORDERING INFORMATION See detailed ordering and shipping information in the package Tunable Antenna Matching Networks dimensions section on page 23 of this data sheet. Compatible with Closedloop and Openloop Antenna Tuner Applications Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: September, 2015 Rev. 5 TCC106/DTCC106 L BOOST VHV GND BOOST VREG Booster Regulator Bandgap AVDD vio on VREG POR GNDA ibias start/vref start 7bit 8 4 bit OUTA DAC VIO DAC VIO POR 8 7bit OUTB por vreg DAC Start Reference GNDIO Registers 8 7bit OUTC DAC 8 7bit OUTD DAC Interface 8 7bit OUTE DAC Level TRIG OTP Shifter 7bit 8 OUTF DAC VIO IDB0 CS CLK DATA ATEST AVDD VREG VHV Figure 1. Control IC Functional Block Diagram www.onsemi.com 2