Some part numbers are not a recommended product. Not recommended for new design. Conductive Polymer Tantalum Solid Capacitors Surface Mount Type TPG series Features Small size, Low profile (L 3.5 W 2.8 H 1.1 mm) Large capacitance (220 F max.) RoHS compliance, Halogen free Specifications Size code B1G B15G Category temp. range 55 to +105 Rated volt. range 2.5 V to 12.5 V 2.5 V to 6.3 V Category volt. range 2.0 V to 10 V 2.0 V to 5.0 V Rated cap. range 33 F to 220 F 150 F to 220 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current Please see the attached characteristics list Dissipation factor(tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.15 +85 1000 h rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor(tan ) 1.5 times of the initial limit Leakage current Within the initial limit +60 , 90 % to 95 % RH, 500 h, No-applied voltage Damp heat Capacitance change Within +40 %, 20 % of the initial value Dissipation factor(tan ) (Steady State) 1.5 times of the initial limit Leakage current 3 times of the initial limit Marking Dimensions (not to scale) Rated Capacitance code Polarity marking (+) L Rated Voltage code Lot. No. R. voltage code Unit V e 2.5 j 6.3 A 10 g 4.0 k 8.0 B 12.5 S W1 S Unit +0.3 +0.3 W10.1 R. capacitance code Unit F Size code L W H0.1 S0.2 -0.1 -0.1 N7 33 A8 100 J8 220 B1G 3.5 2.8 1.1 0.8 2.2 S7 47 E8 150 B15G 3.5 2.8 1.4 0.8 2.2 * Externals of figure are the reference. Characteristics list Case size Floor life Cate- Specifications Standard Rated Cate- Rated level Rated gory Min. temper- gory capaci- Size *1 *4 Reflow Reflow voltage temper- Ripple *2 packaging LC ature *3 *5 voltage tance code ESR temp temp L W H tan Part number (V) ature current q ty (m max.) (A) 260 250 () (V) (F) (mA rms) (pcs) () 85 2.0 105 3.5 2.8 1.1 B1G 1000 70 0.10 55 2R5TPG220M 2500 NRFND NRFND 2.5 220 30/300 kHz 85 2.0 105 3.5 2.8 1.4 1400 0.10 110 2R5TPG220MUG 2500 B15G NRFND 4.0 85 3.2 105 220 3.5 2.8 1.4 1000 70 0.10 88 4TPG220M 2500 85 5.0 105 3.5 2.8 1.1 1000 70 0.10 63 6TPG100M 2500 B1G 85 5.0 105 100 3.5 2.8 1.1 1100 55 0.10 63 6TPG100MG 2500 3 3 NRFND 35/300 kHz 6.3 85 5.0 105 3.5 2.8 1.1 1200 0.10 126 6TPG100MZGD 2500 85 5.0 105 3.5 2.8 1.4 1000 70 0.10 94.5 6TPG150M 2500 B15G 150 35/300 kHz 85 5.0 105 3.5 2.8 1.4 1200 0.10 189 6TPG150MZG 2500 NRFND 8.0 85 6.3 105 47 3.5 2.8 1.1 B1G 1000 70 0.10 37.6 8TPG47M 2500 10 85 8.0 105 47 3.5 2.8 1.1 1000 70 0.10 47 10TPG47M 2500 B1G 3 3 12.5 85 10 105 33 3.5 2.8 1.1 1000 70 0.10 41.3 12TPG33M 2500 *1: Ripple current (100 kHz / +45 ) *2: ESR (100 kHz / +20 ) *3: tan (120 Hz / +20 ) NRFND Not recommended for new design *4: After 5 minutes *5: Compatible products available Please refer to each page in this catarog for Reflow conditions ,Taping specifications andFloor life leve . Please refer to TPS series for the compatible products list. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02-Nov-21 H WGuidelines and precautions regarding the technical information and use of our products described in this online catalog. If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. The technical information in this online catalog provides examples of our products typical operations and application circuits. We do not guarantee the non-infringement of third party s intellectual property rights and we do not grant any license, right, or interest in our intellectual property. If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please selectSales Inquir in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 16-Apr-21