EEU-FP1V132B Panasonic

Aluminum Electrolytic Capacitors Radial Lead Type FP-A series Features Country of origin Endurance : 105 4000 h to 5000 h Malaysia High ripple current (2 to 2.5 times as high as FC series) Large capacitance (Up to 60 % larger than FC series) AEC-Q200 compliant RoHS compliant Specifications Category temp. range 55 to +105 Rated voltage range 25 V to 35 V Capacitance range 510 F to 2000 F Capacitance tolerance 20 % (120 Hz / +20) Leakage current I 0.01 CV (A) After 2 minutes Rated voltageV 25 35 (120 Hz /+20) Dissipation factortan ) Dissipation factortan ) 0.14 0.12 For capacitance value 1000 F, add 0.02 per every 1000 F. After following life test with DC voltage and +105 2 ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage)when the capacitors are restored to 20 , the capacitors shall meet the limits specified bellow. Duration Endurance 10 : 4000 h, 12.5 : 5000 h Capacitance change Within 30 % of the initial value Dissipation factortan ) 300 % of the initial limit DC leakage current Within the initial limit After storage for 1000 h at +105 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance. (With voltage treatment) Frequency correction factor for ripple current Freq.Hz) 120 1 k 10 k 100 k to Cap.F 510 to 1000 0.65 0.75 0.95 1.00 1200 to 2000 0.75 0.80 1.00 1.00 Dimensions Sleeve Pressure relief 14min. 3min. L* D0.5 * L 16L1.5 L 20L2.0 Unitmm D 10.0 12.5 L 16 to 20 20 to 25 d 0.6 0.6 F 5.0 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19 d0.05 F0.5Aluminum Electrolytic Capacitors (Radial Lead Type) FP-A series Case size/ Impedance/ Ripple current 25 V to 35 V R. voltage ESR () Ripple current (mA rms) Case size (mm) (100 kHz) (100 kHz) (DL) +20 -10 +105 10 16 0.068 0.136 2500 10 20 0.052 0.104 3000 12.5 20 0.038 0.076 3250 12.5 25 0.030 0..060 4000 Characteristics list Case size Min. Packaging Specification Lead length (mm) () Q ty (PCS) Rated Capacitance (20 %) Lead space Part No. voltage Ripple Endu- Lead *2 (F) (V) Straight ESR *1 dia. Taping D L rance Taping current leads Straight () (d) B (mA rms) (h) 680 10.0 16.0 2500 0.068 4000 0.6 5.0 5.0 EEUFP1E681( ) 200 500 1000 10.0 20.0 3000 0.052 4000 0.6 5.0 5.0 EEUFP1E102( ) 200 500 25 1500 12.5 20.0 3250 0.038 5000 0.6 5.0 5.0 EEUFP1E152( ) 200 500 2000 12.5 25.0 4000 0.030 5000 0.6 5.0 5.0 EEUFP1E202( ) 200 500 510 10.0 16.0 2500 0.068 4000 0.6 5.0 5.0 EEUFP1V511( ) 200 500 750 10.0 20.0 3000 0.052 4000 0.6 5.0 5.0 EEUFP1V751( ) 200 500 35 1000 12.5 20.0 3250 0.038 5000 0.6 5.0 5.0 EEUFP1V102( ) 200 500 1300 12.5 25.0 4000 0.030 5000 0.6 5.0 5.0 EEUFP1V132( ) 200 500 *1: Ripple current (100 kHz / +105 ) *2: ESR (100 kHz/ +20 ) When requesting taped product, please put the letter. Lead wire pitch B=5 mm. Please refer to the page of Taping dimensions. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 20-Dec-19