TGC4403-SM 8 GHz 15 GHz Packaged Doubler with Amplifier Product Description The Qorvo TGC4403-SM packaged MMIC combines a frequency doubler with a 3-stage amplifier, operating at input frequencies of 8 15 GHz. With greater than 30 dBc isolation between the input and doubler frequency, the TGC4403-SM achieves 20 dBm output power, with 2 dBm input power. This performance makes this doubler ideally suited for Point to Point Radios and Ka-Band satellite ground terminal applications. The TGC4403-SM provides the frequency doubling function in a compact 4 mm x 4 mm package foot print. 16-pin 4x4 mm QFN package Lead-free and RoHS compliant. Function Block Diagram Product Features RF Output Frequency Range: 16 30 GHz Input Frequency Range: 8 15 GHz Output Power: 20 dBm Nominal Gain Power: 18 dBm Applications Input Frequency Isolation: 30 dBc Point-to-Point Radio Bias: V = 5V, I = 150mA, V = 0.8V, D DQ DBL Ka Band Sat-Com VG = 0.5V Typical. Package Dimensions: 4.0 x 4.0 x 0.9 mm Ordering Information Part No. Description 8 15 GHz Packaged Doubler with TGC4403-SM Amplifier Data Sheet Rev D. June 8, 2018 Subject to change without notice 1 of 10 www.qorvo.com TGC4403-SM 8 GHz 15 GHz Packaged Doubler with Amplifier Absolute Maximum Ratings Recommended Operating Conditions Parameter Rating Parameter Min Typ Max Units Drain to Gate Voltage (V - V ) 12 V Operating Temperature Range -40 +25 +85 C D G Drain Voltage (VD) 8 V VD 5 V Doubler Voltage Range (V ) 5 to 0V DBL IDQ 150 mA Gate Voltage Range (VG) 5 to 0V I RF Input = 2dBm 170 mA D Drive Drain Current (I ) 280 mA D VG -0.5 V Gate Current Range (IG) -1 to 23 mA VDBL -0.8 mA Doubler Current Range (I ) -0.6 to 16.8 mA DBL Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating RF Input Power, CW, T = 25 C 18.2 dBm conditions. Power Dissipation (P ), 70C 1.42 W DISS Channel Temperature, Tch 150 C Mounting Temperature (30 sec) 260 C Storage Temperature -65 to 150 C Operation of this device outside the parameter ranges given above may cause permanent damage. These are stress ratings only, and functional operation of the device at these conditions is not implied. Electrical Specifications Test conditions unless otherwise noted: 25C, VD = 5V, IDQ = 150mA, VG = 0.5V Typical, VDBL= 0.8V Fixed. Parameter Conditions Min Typ Max Units Input RF Frequency Range 8 15 GHz Input Freq.= 8 14.5 GHz 14 18 dB Output Freq.= 16 29 GHz Conversion Gain (CG) RF In = 2 dBm Input Freq. = 15 GHz 12 16 dB Output Freq. = 30 GHz Input Return Loss (IRL) Freq. = 8 15 GHz 6 dB Output Return Loss (ORL) Freq. = 16 30 GHz 4 dB Output Power RF In = 2 dBm Freq. = 16 30 GHz 16 20 dBm Input Freq.= 8 14.5 GHz Isolation, Fundamental (Isol 1x) 11 30 dBc Output Freq.= 8 14.5 GHz Input Freq.= 8 10.5 GHz rd Isolation, 3 Harmonic (Isol 3x) 1 10 dBc Output Freq.= 24 31.5 GHz Data Sheet Rev D. June 8, 2018 Subject to change without notice 2 of 10 www.qorvo.com