664G-03LF Renesas

DATASHEET DIGITAL VIDEO CLOCK SOURCE ICS664-03 Description Features The ICS664-03 provides clock generation and conversion Packaged in 16-pin TSSOP for clock rates commonly needed in HDTV digital video Pb (lead) free package, RoHS compliant equipment. The ICS664-03 uses the latest PLL technology Clock or crystal input provides flexibility to provide excellent phase noise and long term jitter Low phase noise supports enhanced SNR performance for superior synchronization and S/N ratio. Lowest jitter in class at 100 ps The ICS664-03 is suitable for Digital Video STB and DTV Exact (0 ppm) multiplication ratios applications. For Transmitter application use ICS664-01 or Power-down mode lowers power consumption ICS664-02. Improved phase noise over ICS660 For audio sampling clocks generated from 27 MHz, use the Provides High definition Video clocks for 720p, 1080i and ICS661. 1080p YUV standards Please contact IDT if you have a requirement for an input and output frequency not included in this document. IDT can rapidly modify this product to meet special requirements. Block Diagram VDD (P2) VDD (P3) VDDO VDD (P14) X2 Crystal Oscillator X1/REFIN SELIN PLL Clock CLK Synthesis S3:0 4 GND (P6) GND (P5) GND (P13) IDT / ICS DIGITAL VIDEO CLOCK SOURCE 1 ICS664-03 REV D 051310ICS664-03 DIGITAL VIDEO CLOCK SOURCE CLOCK SYNTHESIZER Pin Assignment Output Clock Selection Table Input Output S3 S2 S1 S0 Frequency Frequency X1/REFIN 1 16 X2 (MHz) (MHz) VDD 2 15 N/C 0000 Power down VDD 3 14 VDD 0001 27 27 (passthrough) 0010 27 74.25 S0 4 13 GND 0011 27 74.175824 GND 5 12 SELIN 0100 13.5 74.25 0101 13.5 74.175824 GND 6 11 VDDO 0110 27 148.5000 S3 7 10 S1 0111 27 148.351648 S2 8 9 CLK 1000 74.25 54 1001 74.175824 54 1010 74.25 27 16-pin TSSOP 1011 74.175824 27 1100 54 74.25 1101 54 74.175824 1110 54 13.5 1111 27 13.5 Pin Descriptions Pin Pin Pin Pin Description Number Name Type 1 X1/REFIN Input Connect this pin to a crystal or clock input 2 VDD Power Power supply for crystal oscillator. 3 VDD Power Power supply for PLL. 4 S0 Input Output frequency selection. Determines output frequency per table above. Internal pull-up. 5 GND Power Ground for PLL. 6 GND Power Ground for PLL for Crystal Osillator. 7 S3 Input Output frequency selection. Determines output frequency per table above. Internal pull-up. 8 S2 Input Output frequency selection. Determines output frequency per table above. Internal pull-up. 9 CLK Output Clock output. 10 S1 Input Output frequency selection. Determines output frequency per table above. Internal pull-up. 11 VDDO Power Power supply for output stage. 12 SEL Input Low for clock input, high for crystal. Internal pull-up. 13 GND Power Ground for Output. 14 VDD Power Power supply. 15 NC No connect. Do not connect to anything. 16 X2 Input Connect this pin to a crystal. Leave open if using a clock input. IDT / ICS DIGITAL VIDEO CLOCK SOURCE 2 ICS664-03 REV D 051310