STPS160AY STMicroelectronics

STPS160-Y Automotive power Schottky rectifier Datasheet production data Features A Very small conduction losses A Negligible switching losses Low forward voltage drop K K Surface mount miniature packages SMA SMB Avalanche capability specified (JEDEC DO-214AC) (JEDEC DO-214AA) STPS160AY STPS160UY ECOPACK 2 compliant components AEC-Q101 qualified Table 1. Device summary Description Symbol Value Single chip Schottky rectifiers suited to switched I 1 A F(AV) mode power supplies and high frequency DC to V 60 V RRM DC converters. T 150 C j (max) Packaged in SMA and SMB, this device is V 0.57 V especially intended for surface mounting and F (max) used in low voltage, high frequency inverters, free wheeling and polarity protection for automotive application. June 2012 Doc ID 023383 Rev 1 1/9 This is information on a product in full production. www.st.com 9Characteristics STPS160-Y 1 Characteristics Table 2. Absolute ratings (limiting values) Symbol Parameter Value Unit V Repetitive peak reverse voltage 60 V RRM I Average forward current T = 130 C, = 0.5 1 A F(AV) L I Surge non repetitive forward current t =10 ms sinusoidal 75 A FSM p I Repetitive peak reverse current t = 2 s F = 1 kHz square 1 A RRM p I Non repetitive peak reverse current t = 100 s square 1 A RSM p P Repetitive peak avalanche power t = 1 s T = 25 C 2400 W ARM p j T Storage temperature range -65 to + 150 C stg (1) T Operating junction temperature range -40 to + 150 C j dV/dt Critical rate of rise of reverse voltage 10000 V/s 1 dPtot < 1. condition to avoid thermal runaway for a diode on its own heatsink Rth(j-a) dTj Table 3. Thermal resistance Symbol Parameter Value Unit SMA 30 R Junction to lead C/W th(j-l) SMB 23 Table 4. Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit T = 25 C 4A j (1) I Reverse leakage current V = V R R RRM T = 125 C 1.1 4 mA j T = 25 C 0.67 j I = 1 A F T = 125 C 0.49 0.57 j (2) V Forward voltage drop V F T = 25 C 0.8 j I = 2 A F T = 125 C 0.58 0.65 j 1. Pulse test: tp = 5 ms, < 2% 2. Pulse test: tp = 380 s, < 2% To evaluate the conduction losses use the following equation: 2 P = 0.49 x I + 0.08 I F(AV) F (RMS) 2/9 Doc ID 023383 Rev 1