STTH3L06 STMicroelectronics

STTH3L06 Turbo 2 ultrafast high voltage rectifier Datasheet - production data Description A K This device uses ST Turbo 2 600 V technology, and is particularly suited as boost diode in A A discontinuous or critical mode power factor corrections. K K It is also intended for use as a freewheeling diode SMB SMC in power supplies and other power switching applications. Table 1: Device summary DO-201AD Symbol Value IF(AV) 3 A VRRM 600 V IR (max.) 100 A Features T (max.) 175 C j Ultrafast switching Low forward voltage drop V (typ.) 0.85 V F Low thermal resistance trr (typ.) 60 ns Low leakage current (platinum doping) Table 2: Order codes Part number Marking STTH3L06 STTH3L06 STTH3L06U 3L6U STTH3L06S S06 April 2016 DocID8322 Rev 4 1/11 www.st.com This is information on a product in full production. Characteristics STTH3L06 1 Characteristics Table 3: Absolute ratings (limiting values at 25 C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V I Forward rms current 10 A F(RMS) DO-201AD/SMC TI = 100 C Average forward current = I 3 A F(AV) 0.5, square wave SMB TI = 80 C DO-201AD 70 A Surge non repetitive forward current, tp = 10 ms I FSM sinusoidal SMB/SMC 60 A Tstg Storage temperature range -65 to +175 C T Maximum operating junction temperature +175 C j Table 4: Thermal parameters Symbol Parameter Maximum Unit DO-201AD L = 10 mm 20 Rth(j-l) Junction to lead SMB 25 C/W SMC 20 Rth(j-a) Junction to ambient DO-201AD L = 10 mm 75 Table 5: Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit Tj = 25 C - 3 IR Reverse leakage current VR = VRRM A T = 150 C - 15 100 j Tj = 25 C - 1.3 VF Forward voltage drop IF = 3 A V T = 150 C - 0.85 1.05 j To evaluate the conduction losses use the following equation: 2 P = 0.89 x I + 0.055 I F(AV) F (RMS) Table 6: Dynamic characteristics Symbol Parameters Test conditions Min. Typ. Max. Unit Reverse I = 1 A dI /dt = -50 A/s F F trr Tj = 25 C - 60 85 recovery time V = 30 V R ns Forward IF = 3 A dIF/dt = 100 t - 100 fr recovery time A/s VFR = 1.1 x VFmax T = 25 C j Forward V recovery I = 3 A dl /dt = 100 A/s - 7.5 V FP F F voltage 2/11 DocID8322 Rev 4