STTH5R06DJF Datasheet Ultrafast recovery diode high efficiency A(1) Features K Suited for DC/DC converts A(2) Low losses High T K K j High surge current capability High energy avalanche capability 1 mm package thickness A(2) A(2) ECOPACK 2 compliant component A(1) A(1) TM PowerFLAT 5X6 Description High performance diode suited for high frequency DC to DC converters. Packaged in PowerFLAT 5x6, this device is intended to be used in low voltage high frequency inverters. PowerFLAT is a trademark of STMicroelectronics. Product status STTH5R06DJF Product summary I 5 A F(AV) V 600 V RRM T (max.) 175 C j V (typ.) 0.95 V F t (typ.) 30 ns rr DS8871 - Rev 2 - March 2018 www.st.com For further information contact your local STMicroelectronics sales office.STTH5R06DJF Characteristics 1 Characteristics Table 1. Absolute ratings (limiting values at 25 C, unless otherwise specified, anode terminals short circuited) Symbol Parameter Value Unit V Repetitive peak reverse voltage 600 V RRM I Forward rms current 45 A F(RMS) I Average forward current T = 160 C, = 0.5, square wave 5 A F(AV) C I Surge non repetitive forward current t = 10 ms sinusoidal 190 A FSM p T Storage temperature range -65 to +175 C stg T Maximum operating junction temperature 175 C j Table 2. Thermal parameters Symbol Parameter Max. value Unit R Junction to case 2.0 C/W th(j-c) Table 3. Static electrical characteristics (anode terminals short circuited) Symbol Parameter Test conditions Min. Typ. Max. Unit T = 25 C - 60 j (1) V = 600 V I Reverse leakage current A R R T = 125 C - 60 600 j T = 25 C - 1.55 2.00 j (2) V I = 5 A Forward voltage drop V F F T = 125 C - 0.95 1.20 j 1. Pulse test: t = 5 ms, < 2% p 2. Pulse test: t = 380 s, < 2% p To evaluate the conduction losses use the following equation: 2 P = 0.9 x I + 0.06 I F(AV) F (RMS) Table 4. Recovery characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit I = 1 A, V = 30 V, dI /dt = - 100 A/s - 30 40 F R F t Reverse recovery time T = 25 C ns rr j I = 1 A, V = 30 V, dI /dt = - 50 A/s - 40 55 F R F I Reverse recovery current - 6.0 8.0 A RM S Reverse recovery softness factor T = 125 C I = 5 A, V = 400 V, dI /dt = - 200 A/s - 0.5 - factor j F R F Q Reverse recovery charges - 180 nC rr DS8871 - Rev 2 page 2/12