STTH8S06 Turbo 2 ultrafast high voltage rectifier Datasheet - production data K A Description This device is an ultrafast diode based on 600 V K Pt doping planar technology. It can be used in hard switching conditions for power factor corrections. Its extremely low reverse recovery current reduces the switching A power losses of the MOSFET and thus increases K TO-220AC the overall application efficiency. This diode is also intended for applications in power supplies and power conversions systems, and all sorts of power switching. Table 1: Device summary A Symbol Value K TO-220FPAC IF(AV) 8 A V 600 V RRM Features IRM(typ.) 4.4 A Ultrafast recovery V (typ.) 1.5 V F Low reverse recovery current Tj (max.) 175 C Low thermal resistance t (typ.) 12 ns rr Higher frequency operation Reduces switching and conduction losses Insulated TO-220FPAC: Insulating voltage = 2000 V RMS Package capacitance = 12 pF February 2017 DocID14277 Rev 2 1/12 www.st.com This is information on a product in full production. Characteristics STTH8S06 1 Characteristics Table 2: Absolute ratings (limiting values at 25 C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V I Average forward current = 0.5 square wave 8 A F(AV) IFSM Surge non repetitive forward current tp = 10 ms 60 A T Storage temperature range -65 to +175 stg C Tj Maximum operating junction temperature 175 Table 3: Thermal parameters Symbol Parameter Max. value Unit TO-220AC, 3.0 C/ DPAK Rth(j-c) Junction to case W TO-220FPAC 5.5 Table 4: Static electrical characteristics (per diode) Symbol Parameter Test conditions Min. Typ. Max. Unit T = 25 C - 20 j I Reverse leakage current V = 600 V A R R Tj = 125 C - 25 200 T = 25 C - 3.4 j V Forward voltage drop I = 8 A V F F Tj = 150 C - 1.5 1.9 To evaluate the maximum conduction losses, use the following equation: 2 P = 1.20 x IF(AV) + 0.087 x IF (RMS) Table 5: Dynamic electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit IF = 1 A, trr Reverse recovery time dIF/dt = - 200 A/s, - 12 18 ns VR = 30 V Reverse recovery IRM - 1.6 2.2 A T = 25 C j current IF = 8 A, Sfactor Softness factor dIF/dt = - 200 A/s, - 1 - VR = 200 V Reverse recovery Qrr - 17 nC charges Reverse recovery IRM - 4.4 6.0 A current I = 8 A, F Sfactor Softness factor Tj = 125 C dIF/dt = - 200 A/s, - 0.3 - V = 200 V R Reverse recovery Qrr - 90 nC charges 2/12 DocID14277 Rev 2