May 2010 TX03 Series 32-bit / 100-pin TMPM380FWFG TMPM380FWDFG TMPM380FYFG TMPM380FYDFG High-performance microcontrollers containing a multi-purpose timer for controlling the power devices used for home electronics, and realizing 5V single supply operation to achieve control over Induction Heating (IH) appliances and motors. Features ARM Cortex-M3 CPU Core Operating voltage: 4.0 to 5.5 V Maximum operating frequency: 40 MHz (10 MHz 4 by PLL) On-chip debug circuit JTAG/SWD/SWV,TRACE (DATA2 bits) Built-in Functions 12-bit AD converter: 2-s conversion time, 18-channel. Multi-purpose timer (MPT): 3 channels (Note: 2channels Flash Memory Size for three-phase PWM) Part number ROM (Flash) RAM Three-phase PWM output: Synchronous 3-channel PWM output (with AD conversion trigger) TMPM380FWFG** 128 Kbytes 12 Kbytes IGBT control-timer: Synchronous 2-channel PPG output, TMPM380FWDFG** 128 Kbytes 12 Kbytes external trigger start, dead-time output, protection circuit TMPM380FYFG** 256 Kbytes 16 Kbytes controls in emergency TMPM380FYDFG** 256 Kbytes 16 Kbytes Encoder input : 2 channels **:Under development 16-bit timer : 8 channels RTC : 1 channel SIO/UART : 5 channels 2 I C/SIO : 2 channels (1 channel is shared with SSP) SSP(SPI mode) : 2 channels (1 channel is shared with 2 I C/SIO.) Remote control signal preprocessor : 1 channel DMA controller : 2 channels Power-on reset circuit Voltage detection circuit Internal Oscillator (10 MHz) Oscillation frequency detector (only when external oscillator is used) * ARM and ARM Cortex are trademarks or registered trademarks of ARM Limited in the EU and other countries. Package Information Pin Assignments Package name: LQFP100-P-1414-0.50H