MAT United Automation

MANUAL PHASE ANGLE MAT SPECIFICATIONS TRIAC TRIGGER ac system line voltage 110/230V 10% Line frequency 50/60Hz MODULE X10224 Minimum offset at 110V 0-50% Minimum offset at 230V 0-50% INTRODUCTION Conduction phase angle typical 0-160 The MAT is a variable phase-angle triac trigger module. It is a compact, safe Controlled phase angle typical 30-160 and tamperproof unit capable of driving all typical triacs on 230/110V ac Isolation voltage 2500V rms regulator circuits. The unit has a manual control potentiometer and minimum Maximum leakage current 6mA output trimmer built in a industrial panel mounting enclosure. Storage temperature 0-85C APPLICATIONS Operating temperature 0-65C Suitable for most ac resistive or inductive loads via a triac, on single phase to Mounting hole diameter 10mm neutral supplies, within voltage limits. FUSING FEATURES It is recommended to use semiconductor fast acting type fuses or circuit breakers (Semiconductor-MCB) for unit/device protection. On initial switch on some loads may need an increased Factor of Safety (F of S) for unit and/or device protection. Compact and easy to use (See the SRA Datasheet for further information). Solid state reliability CE MARKING Single hole panel mounting This product family carries a CE marking. These phase angle controllers need a suitable remote filter. For information see recommendation section and contact our sales desk. (See Declaration of Conformity). Minimum offset Highly efficient RECOMMENDATION Other documents available on request, which may be appropriate for your applications. RoHS Compliant CODE IDENTITY DESCRIPTION X10229 RFI Filtering recommendation - addressing EMC directive. INSTALLATION X10213 ITA Interaction, uses for phase angle and for burst fire control. X10255 SRA Safety requirements - addressing the Low Voltage Directive (LVD) including :-Thermal data/cooling Live parts warning & Earth requirements Fusing recommendations. P01.1 COS UAL Conditions of sale NOTE: It is recommended that installation and maintenance of this equipment should be done with reference to the current edition of the I.E.T. (formally I.E.E.) regulations (BS7671) by suitably qualified/trained personnel. The regulations contain important requirements regarding installation and safety of electrical equipment. Specific installers should refer to local and national regulations. ORDER CODE: State part number: MAT. Optional extras include triac, heatsink assembly. UNITED AUTOMATION LIMITED Southport Business Park Tel: 0044 (0) 1704 516500 Wight Moss Way Fax: 0044 (0) 1704 516501 Southport, PR8 4HQ enquiries united-automation.com ENGLAND www.united-automation.com Page No. 2 of 2 Issue 3 Date 31/07/12 X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for united automation manufacturer: Other Similar products are found below : F175-25A QVR-230 SSC-25 QVR-TB-RFI CSR604A PAC2 CSR1004A AFM-11 DCM-24-40 CSR1504A QVR/S-RFI 17 PSR-25