UFG2A220MPM1TD

ALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS High Grade Standard Type, For Audio Equipment UKZ UFG DimensionsFine Gol MUSE acoustic series suited for high grade audio equipment, using state of the art etching techniques. Leakage Current Rated Voltage Rated Rich sound in the bass register and clearer high end, most Case Size A V Capacitance tan Part Number suited for AV equipment. DLmm at 20 after code F 1 minute Compliant to the RoHS directive (2011/65/EU,(EU)2015/863). 33 811.5 0.12 8.25 UKZ1E330MPM 47 1012.5 0.12 11.75 UKZ1E470MPM 100 1016 0.12 25 UKZ1E101MPM 25 220 12.520 0.12 55 UKZ1E221MHM UKZ High Grade High Grade UFW UFG 1E 330 12.525 0.12 82.5 UKZ1E331MHM Specifications 470 1625 0.12 117.5 UKZ1E471MHM Item Performance Characteristics 1000 1635.5 0.12 250 UKZ1E102MHM Category Temperature Range 40 to +85C Rated Voltage Range 6.3 to 100V 22 811.5 0.08 11 UKZ1H220MPM 1 to 10000F Rated Capacitance Range 33 1012.5 0.08 16.5 UKZ1H330MPM Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 1 minute s application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A) , whichever is greater. 47 1016 0.08 23.5 UKZ1H470MPM Measurement frequency : 120Hz at 20C 100 12.520 0.08 50 UKZ1H101MHM 50 Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Tangent of loss angle (tan ) 1H tan (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08 220 1625 0.08 110 UKZ1H221MHM For capacitance of more than 1000F add 0.02 for every increase of 1000F. 330 1631.5 0.08 165 UKZ1H331MHM Measurement frequency : 120Hz 470 1635.5 0.08 235 UKZ1H471MHM Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Stability at Low Temperature Z25C / Z+20C 4 3 2 2 2 2 2 2 2 Impedance ratio 1000 1840 0.08 500 UKZ1H102MHM (MAX.) Z40C / Z+20C 8 6 4 4 3 3 3 3 3 10 811.5 0.07 10 UKZ2A100MPM The specifications listed at right Within 20% of the initial measurement for units of not more than 16V or 6.3 Capacitance change 22 1016 0.07 22 UKZ2A220MPM shall be met when the Within 15% of the initial measurement for units of not less than 25V or above 6.3 Endurance capacitors are restored to 20 C tan 150% or less than the initial specified value 33 1020 0.07 33 UKZ2A330MPM after the rated voltage is applied Less than or equal to the initial specified value Leakage current 100 for 1000 hours at 85C. 47 12.520 0.07 47 UKZ2A470MHM 2A After storing the capacitors under no load at 85 C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 Shelf Life 100 1625 0.07 100 UKZ2A101MHM clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on gold sleeve. 220 1635.5 0.07 220 UKZ2A221MHM 330 1835.5 0.07 330 UKZ2A331MHM For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). Radial Lead Type Type numbering system (Example : 10V 47 F) If there is no size code in the part number, please add size code 1 and then add the appropriate code. 1 2 3 4 5 6 7 8 9 10 11 U F G 1 A 4 7 0 M D M Sleeve (P.E.T.) d For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. Configuration Capacitance tolerance (20%) D Code 5 DM Rated capacitance (47F) 6.3 EM Rated voltage (10V) 8 10 PM Series name 12.5 to 18 HM Pressure relief vent (6.3up) Type + MAX. MIN MIN L 15 4 (mm) D 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 Frequency coefficient of rated ripple current d 0.6 0.6 0.6 0.6 0.8 0.8 0.8 Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Cap.(F) 1 to 47 0.75 1.00 1.35 1.57 2.00 100 to 470 0.80 1.00 1.23 1.34 1.50 (L < 20) 1.5 (L 20) 2.0 1000 to 10000 0.85 1.00 1.10 1.13 1.15 Please refer to the Guidelines for Aluminum Electrolytic Capacitors for end seal configuration information. Dimension table in next page. CAT.8100K +0.5MAX. D 0.5 PALUMINUM ELECTROLYTIC CAPACITORS ALUMINUM ELECTROLYTIC CAPACITORS UFG UFG Dimensions Dimensions Leakage Current Leakage Current Rated Voltage Rated Rated Ripple Rated Voltage Rated Rated Ripple Case Size A Case Size A V Capacitance tan mArms Part Number V Capacitance tan mArms Part Number DLmm at 20 after DLmm at 20 after code F 85/120Hz code F 85/120Hz 1 minute 1 minute 470 1012.5 0.22 29.61 270 UFG0J471MPM 1 511 0.10 3 9 UFG1H010MDM 1000 1020 0.22 63 485 UFG0J102MPM 2.2 511 0.10 3 18 UFG1H2R2MDM 2200 12.525 0.24 138.6 867 UFG0J222MHM 3.3 511 0.10 3 22 UFG1H3R3MDM 6.3 3300 1625 0.26 207.9 1135 UFG0J332MHM 4.7 511 0.10 3 27 UFG1H4R7MDM 0J 4700 1631.5 0.28 296.1 1431 UFG0J472MHM 10 511 0.10 5 39 UFG1H100MDM 6800 1835.5 0.32 428.4 1810 UFG0J682MHM 22 6.311 0.10 11 65 UFG1H220MEM 50 10000 1840 0.40 630 2100 UFG0J103MHM 33 811.5 0.10 16.5 93 UFG1H330MPM 1H 47 511 0.19 4.7 60 UFG1A470MDM 47 811.5 0.10 23.5 111 UFG1H470MPM 100 6.311 0.19 10 99 UFG1A101MEM 100 1016 0.10 50 215 UFG1H101MPM 220 811.5 0.19 22 170 UFG1A221MPM 220 12.520 0.10 110 390 UFG1H221MHM 330 1012.5 0.19 33 247 UFG1A331MPM 330 12.520 0.10 165 488 UFG1H331MHM 470 1016 0.19 47 330 UFG1A471MPM 470 1625 0.10 235 650 UFG1H471MHM 10 1A 1000 12.520 0.19 100 601 UFG1A102MHM 1000 1631.5 0.10 500 1143 UFG1H102MHM 2200 1625 0.21 220 1047 UFG1A222MHM 10 6.311 0.09 6.3 50 UFG1J100MEM 3300 1631.5 0.23 330 1520 UFG1A332MHM 22 811.5 0.09 13.86 85 UFG1J220MPM 4700 1635.5 0.25 470 1840 UFG1A472MHM 33 811.5 0.09 20.79 105 UFG1J330MPM 6800 1840 0.29 680 2049 UFG1A682MHM 47 1012.5 0.09 29.61 140 UFG1J470MPM 63 33 511 0.16 5.28 57 UFG1C330MDM 100 1020 0.09 63 255 UFG1J101MPM 1J 47 6.311 0.16 7.52 74 UFG1C470MEM 220 12.520 0.09 138.6 420 UFG1J221MHM 100 811.5 0.16 16 128 UFG1C101MPM 330 12.525 0.09 207.9 541 UFG1J331MHM 220 1012.5 0.16 35.2 226 UFG1C221MPM 470 1625 0.09 296.1 840 UFG1J471MHM 330 1016 0.16 52.8 309 UFG1C331MPM 1000 1835.5 0.09 630 1400 UFG1J102MHM 16 1C 470 1020 0.16 75.2 406 UFG1C471MPM 10 6.311 0.09 8 55 UFG1K100MEM 1000 12.525 0.16 160 723 UFG1C102MHM 22 811.5 0.09 17.6 100 UFG1K220MPM 2200 1625 0.18 352 1290 UFG1C222MHM 33 1012.5 0.09 26.4 130 UFG1K330MPM 3300 1635.5 0.20 528 1720 UFG1C332MHM 47 1016 0.09 37.6 170 UFG1K470MPM 80 1K 4700 1835.5 0.22 752 2140 UFG1C472MHM 100 12.520 0.09 80 270 UFG1K101MHM 22 511 0.14 5.5 50 UFG1E220MDM 220 12.525 0.09 176 490 UFG1K221MHM 33 6.311 0.14 8.25 70 UFG1E330MEM 330 1631.5 0.09 264 650 UFG1K331MHM 47 6.311 0.14 11.75 85 UFG1E470MEM 470 1635.5 0.09 376 920 UFG1K471MHM 100 811.5 0.14 25 140 UFG1E101MPM 1 511 0.08 3 15 UFG2A010MDM 220 1016 0.14 55 260 UFG1E221MPM 2.2 511 0.08 3 22 UFG2A2R2MDM 25 1E 330 1020 0.14 82.5 351 UFG1E331MPM 3.3 511 0.08 3.3 27 UFG2A3R3MDM 470 12.520 0.14 117.5 476 UFG1E471MHM 4.7 511 0.08 4.7 36 UFG2A4R7MDM 1000 1625 0.14 250 854 UFG1E102MHM 10 811.5 0.08 10 65 UFG2A100MPM 2200 1635.5 0.16 550 1570 UFG1E222MHM 22 1012.5 0.08 22 110 UFG2A220MPM 100 2A 3300 1840 0.18 825 1794 UFG1E332MHM 33 1016 0.08 33 150 UFG2A330MPM 22 6.311 0.12 7.7 60 UFG1V220MEM 47 1020 0.08 47 190 UFG2A470MPM 33 6.311 0.12 11.55 75 UFG1V330MEM 100 12.520 0.08 100 300 UFG2A101MHM 47 811.5 0.12 16.45 101 UFG1V470MPM 220 1625 0.08 220 549 UFG2A221MHM 100 1012.5 0.12 35 176 UFG1V101MPM 330 1631.5 0.08 330 734 UFG2A331MHM 35 220 1020 0.12 77 320 UFG1V221MPM 470 1835.5 0.08 470 980 UFG2A471MHM 1V 330 12.520 0.12 115.5 446 UFG1V331MHM For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. 470 12.525 0.12 164.5 590 UFG1V471MHM 1000 1625 0.12 350 1060 UFG1V102MHM 2200 1835.5 0.14 770 1840 UFG1V222MHM For formed lead or taped product specifications and minimum order quantity, please refer to the Guidelines for Aluminum Electrolytic Capacitors. For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit). If there is no size code in the part number, please add size code 1 and then add the appropriate code. CAT.8100K