ALUMINUM ELECTROLYTIC CAPACITORS High Ripple Low Impedance Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C HD series Lower impedance at high frequency range. Smaller case size and high ripple current. Compliant to the RoHS directive (2011/65/EU). HD Smaller HV Specifications ltem Performance Characteristics Category Temperature Range 40 to +105C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 22 to 6800F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 50 120Hz Tangent of loss angle (tan ) tan (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 20C For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Rated voltage (V) 6.3 10 16 25 35 50 120Hz Stability at Low Temperature Z25C / Z+20C 2 2 2 2 2 2 Impedance ratio ZT / Z20 (MAX.) Z40C / Z+20C 3 3 3 3 3 3 The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias Capacitance change Within 25% of the initial capacitance value plus rated ripple current is applied for 5000 hours Endurance tan 200% or less than the initial specified value (2000 hours for D=5 and 6.3, 3000 hours for D=8, Leakage current Less than or equal to the initial specified value 4000 hours for D=10), at 105C, the peak voltage shall not exceed the rated voltage. Marking Printed with white color letter on black sleeve. Radial Lead Type Type numbering system (Example : 10V 3300 F) 1 2 3 4 5 6 7 8 9 10 11 12 ( ) d Sleeve P.E.T. U H D 1 A 3 3 2 M H D Size code Configuration Capacitance tolerance (20%) Rated capacitance (3300F) Rated voltage (10V) Pressure relief vent MIN MIN + MAX. 15 4 Series name L (6.3up) Type Configuration (mm) Pb-free leadwire D Pb-free PET sleeve D 5 6.3 8 10 12.5 16 (L < 20) 1.5 5 DD P 2.0 2.5 3.5 5.0 5.0 7.5 (L 20) 2.0 6.3 ED d 0.5 0.5 0.6 0.6 0.6 0.8 8 10 PD In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm. 12.5 16 HD Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D + 0.5 MAX. D 0.5 PALUMINUM ELECTROLYTIC CAPACITORS HD series Standard Ratings V (Code) 6.3 (0J) 10 (1A) Case size Impedance () MAX. Rated ripple Case size Impedance () MAX. Rated ripple Item (mArms) (mArms) D L D L (mm) 105C / 100kHz (mm) 105C / 100kHz 20C / 100kHz 10C / 100kHz 20C / 100kHz 10C / 100kHz Cap.(F) Code 100 101 5 11 0.30 1.0 250 150 151 5 11 0.30 1.0 250 220 221 6.3 11 0.13 0.41 405 330 331 6.3 11 0.13 0.41 405 470 471 8 11.5 0.072 0.22 760 560 561 0.072 0.22 760 8 11.5 8 15 0.056 0.17 995 680 681 10 12.5 0.053 0.16 1030 820 821 0.056 0.17 995 8 15 8 20 0.041 0.13 1250 1000 102 10 12.5 0.053 0.16 1030 10 16 0.038 0.12 1430 8 20 0.041 0.13 1250 1200 122 10 20 0.023 0.069 1820 10 16 0.038 0.12 1430 1500 152 0.023 0.069 1820 10 25 0.022 0.066 2150 10 20 2200 222 10 25 0.022 0.066 2150 12.5 20 0.021 0.053 2360 3300 332 12.5 20 0.021 0.053 2360 12.5 25 0.018 0.045 2770 12.5 31.5 0.016 0.041 3290 3900 392 0.018 0.045 2770 12.5 25 16 20 0.018 0.045 3140 4700 472 12.5 31.5 0.016 0.041 3290 12.5 35.5 0.015 0.039 3400 0.015 0.039 3400 12.5 35.5 5600 562 16 25 0.016 0.043 3460 16 20 0.018 0.045 3140 6800 682 16 25 0.016 0.043 3460 V (Code) 16 (1C) 25 (1E) Case size Impedance () MAX. Rated ripple Case size Impedance () MAX. Rated ripple Item (mArms) (mArms) D L D L (mm) 20C / 100kHz 10C / 100kHz 105C / 100kHz (mm) 20C / 100kHz 10C / 100kHz 105C / 100kHz Cap. (F ) Code 47 470 5 11 0.30 1.0 250 56 560 0.30 1.0 250 5 11 6.3 11 100 101 0.13 0.41 405 120 121 6.3 11 0.13 0.41 405 220 221 8 11.5 0.072 0.22 760 8 15 0.056 0.17 995 330 331 8 11.5 0.072 0.22 760 10 12.5 0.053 0.16 1030 0.056 0.17 995 8 20 8 15 0.041 0.13 1250 470 471 10 16 10 12.5 0.053 0.16 1030 0.038 0.12 1430 8 20 0.041 0.13 1250 680 681 10 20 0.023 0.069 1820 0.038 0.12 1430 10 16 10 25 820 821 0.022 0.066 2150 1000 102 10 20 0.023 0.069 1820 12.5 20 0.021 0.053 2360 0.022 0.066 2150 1200 122 10 25 12.5 25 1500 152 12.5 20 0.021 0.053 2360 0.018 0.045 2770 12.5 31.5 0.016 0.041 3290 1800 182 16 20 0.018 0.045 3140 2200 222 12.5 25 0.018 0.045 2770 12.5 35.5 0.015 0.039 3400 0.016 0.041 3290 12.5 31.5 2700 272 16 25 0.016 0.043 3460 16 20 0.018 0.045 3140 3300 332 12.5 35.5 0.015 0.039 3400 3900 392 0.016 0.043 3460 16 25 : In this case, 6 will be put at 12th digit of type numbering system. CAT.8100D