Document Number: MC9S08LC60 Freescale Semiconductor Rev. 4.1 11/2014 Data Sheet MC9S08LC60 Data Sheet Rev. 4.1 of the MC9S08LC60 data sheet has two parts: The addendum to revision 4 of the data sheet, immediately following this cover page. Revision 4 of the data sheet, following the addendum. The addendum identifies errors and changes in revision 4 of the data sheet. It is intended to clearly identify changes so readers can find them easily. Freescale Semiconductor, Inc., 2014. All rights reserved.Document Number: MC9S08LC60 Freescale Semiconductor Rev. 1 11/2014 Data Sheet Addendum Addendum for Rev. 4 of the MC9S08LC60 Data Sheet 1 Information removed from Figure 6-23, Pullup Enable for Port C (PTCPE) Please remove the footnote 1 under Figure 6-23, Pullup Enable for Port C (PTCPE). The note says, PTCPE7 has no effect on the output-only PTC7 pin. The figure will now look like this: 7 6 5 4 3 2 1 0 R (1) PTCPE7 PTCPE6 PTCPE5 PTCPE4 PTCPE3 PTCPE2 PTCPE1 PTCPE0 W Reset 0 0 0 0 0 0 0 0 Figure 6-23. Pullup Enable for Port C (PTCPE) 1. PTCPE6 has no effect on the output-only PTC6 pin. 2 Information removed from Figure 6-24, Output Slew Rate Control Enable (PTCSE) Please remove the footnote 2 under Figure 6-24, Output Slew Rate Control Enable (PTCSE). The note says, Reads of PTCD6 always return the contents of PTCD6, regardless of the value stored in the bit PTCDD6. The figure will now look like this: Freescale Semiconductor, Inc., 2014. All rights reserved.