EE-SX3173-P3-Z

Photomicrosensor (Transmissive) EE-SX3173/4173-P Series Built-in Photomicrosensor Connector Type Mounted with M3 screws 5 VDC and 24 VDC power supply types are available Photo IC output (Dark-ON/Light-ON) Connector with secure lock compatible with JST GHR-03 Equipped with a Zener diode, which increases noise immunity (for EE-SX3173/4173-P3-Z only) Connector with cable is also available (order separately) EE-5002 1M (Refer to page 7.) Be sure to read Safety Precautions on page 4. Features Models available Power supply voltage: In addition to the conventional 5 VDC supply, Mounting: New model available with M3 screws model also available with 24 VDC supply best for large devices Board 7 4 3.2 dia. 3.2 Compatible with 24 VDC Downsizing Environment resistance Smallest class in the industry *: Downsizing of products with unique Connection: Equipped with connectors with locks for resistance optical elements is realized against vibration and shock * As of August 2018, according to research by our company 14.7 Application Examples Packaging Machine Analysis and Measurement Equipment Printing Equipment ATM 1 14.8 13.6EE-SX3173/4173-P Series Model Number Structure EE-SX -P - (1)(2) (3)(4)(5) (6) (7) (1) Sensing method (2) Operating mode (3) Structure (4) Mounting screw size X: Transmissive 3: Dark-ON 1: Standard structure 7: M3 4: Light-ON (5) Appearance (6) Power supply voltage (7) Protection circuit 3: L-shaped mounting 2: 5 VDC Z: Available 3: 24 VDC Ordering Information Power Sensing Connecting Aperture size Output Operating Appearance Sensing distance supply Model method method H x W (mm) type mode voltage Dark-ON EE-SX3173-P3-Z Emitter 24 VDC Transmissi 1.4 1.4 Light-ON EE-SX4173-P3-Z 14.7 5 mm Connector Photo IC ve (Slot width) Dark-ON EE-SX3173-P2 (slot type) Detector 5 VDC 1.4 0.5 Light-ON EE-SX4173-P2 Ratings, Characteristics and Exterior Specifications Absolute Maximum Ratings (Ta = 25C) Electrical and Optical Characteristics (Ta = 25C) Rated value Value Item Symbol Unit Remarks EE-SX3173-P3-Z EE-SX3173-P2 Symbol 24 VDC model 5 VDC model EE-SX4173-P3-Z EE-SX4173-P2 Item Dark-ON EE-SX3173-P3-Z EE-SX3173-P2 Power supply VCC 26.4 DC 5.5 DC V --- voltage Light-ON EE-SX4173-P3-Z EE-SX4173-P2 Output voltage VOUT 26.4 13.2 V --- Power supply 24 10%V 5 10%V VCC voltage Ripple (p-p) 10% Ripple (p-p) 10% Output current IOUT 16 mA --- 15 mA max. 25 mA max. Permissible Current ICC (With and without (With and without output POUT 80 mW Fig 1. consumption incident) incident) dissipation 0.3 V max. (IOUT = 16 mA) Operating Low-level Topr -25 to +55 C * VOL (Dark-ON: Without incident, temperature output voltage Light-ON: With incident) Storage Tstg -30 to +80 C * (Vcc x 0.9 V min. (VOUT = VCC, RL = 47 k)) temperature High-level VOH (Dark-ON: With incident, output voltage Soldering Light-ON: Without incident) Tsol --- C --- temperature Sensing object --- 1.4 0.5 min.*1 * Reduce the voltage and current, if necessary, by reference to the Response 3kHz min. temperature rating chart (Fig. 1.), even if the temperature is within f frequency (VOUT = VCC, IOUT = 16 mA*2) the specified range. The product should be used without freezing or Operating condensation. --- 1000 lx max.*3 ambient light Exterior Specifications Peak emission P 855 nm 940 nm wavelength Appearance L-shaped mounting *1. Objects that do not allow infrared light to pass through them. EE-SX3173-P3-Z *2. The value of the response frequency is measured by rotating the EE-SX4173-P3-Z disk as shown below. Item EE-SX3173-P2 EE-SX4173-P2 Disk Connecting method Connector 2.1 mm Weight Approx. 1.5 g Case Polybutylene terephthalate (PBT) 0.5 mm 0.5 mm Materials Emitter/ Polyphenylene sulfide (PPS) fiber receiver *3. When fluorescent light is used. 2 14.8 13.6