Ultrafast Power Rectifier, Surface Mount Plastic SOD 123FL Package NHP120SF, NRVHP120SF This SOD 123FL ultrafast rectifier provides fast switching performance with soft recovery in a compact thermally efficient www.onsemi.com package. Its compact footprint makes it ideally suited to portable and automotive applications where board space is at a premium. Its low ULTRAFAST RECTIFIER profile makes it a good option for flat panel display and other applications with limited vertical clearance. The device offers low 1.0 AMPERES leakage over temperature making it a good match for applications 200 VOLTS requiring low quiescent current. Features Fast Soft Switching for Reduced EMI and Higher Efficiency Low Profile Maximum Height of 1.0 mm 2 Small Footprint Footprint Area of 5.94 mm SOD123FL NRV Prefix for Automotive and Other Applications Requiring CASE 498 Unique Site and Control Change Requirements AECQ101 Qualified and PPAP Capable MARKING DIAGRAM These Devices are PbFree, Halogen Free/BFR Free and are RoHS Compliant P12M Mechanical Characteristics: Case: Molded Epoxy Epoxy Meets UL 94 V0 0.125 in P12 = Specific Device Code Weight: 11.7 mg (Approximately) M = Date Code Lead and Mounting Surface Temperature for Soldering Purposes: = PbFree Package 260C Maximum for 10 Seconds (Note: Microdot may be in either location) MSL 1 Applications ORDERING INFORMATION Instrumentation Device Package Shipping Output Rectification in Switching Power Supplies Including Mini Adaptors and Flat Panel Display NHP120SFT3G SOD123 10000 / Tape & (PbFree) Reel LED Lighting Freewheeling Diode Where Space is at a Premium NRVHP120SFT3G SOD123 10000 / Tape & (PbFree) Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2014 1 Publication Order Number: April, 2020 Rev. 1 NHP120SF/DNHP120SF, NRVHP120SF MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage V 200 V RRM Working Peak Reverse Voltage V RWM DC Blocking Voltage V R Average Rectified Forward Current I 1.0 A O (T = 158C) L Peak Repetitive Forward Current I 2.0 A FRM (Square Wave, 20 kHz, T = 155C) L NonRepetitive Peak Surge Current I 30 A FSM (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Storage and Operating Junction Temperature Range (Note 1) T , T 65 to +175 C stg J Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The heat generated must be less than the thermal conductivity from JunctiontoAmbient: dP /dT < 1/R . D J JA THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Thermal Resistance, JunctiontoLead (Note 2) 23 C/W JCL Thermal Resistance, JunctiontoAmbient (Note 2) R 85 C/W JA Thermal Resistance, JunctiontoAmbient (Note 3) R 330 C/W JA ELECTRICAL CHARACTERISTICS Characteristic Symbol Value Unit V V Maximum Instantaneous Forward Voltage (Note 4) F 1.0 (I = 1.0 A, T = 25C) F J 1.1 (I = 2.0 A, T = 25C) F J 0.85 (I = 1.0 A, T = 125C) F J 0.95 (I = 2.0 A, T = 125C) F J Maximum Instantaneous Reverse Current (Note 4) I A R (Rated dc Voltage, T = 25C) 0.5 J (Rated dc Voltage, T = 125C) 25 J Reverse Recovery Time t 25 ns rr I = 1.0 A, V = 30 V, dl/dt = 50 A/ s, T = 25C F R J Reverse Recovery Time t 50 ns rr I = 1.0 A, V = 30 V, dl/dt = 50 A/ s, T = 50C F R J E 10 mJ Maximum NonRepetitive Avalanche Energy AS T = 25C J Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2 2 2. Mounted with 700 mm copper pad size (Approximately 1 in ) 1 oz FR4 Board. 2 3. Mounted with pad size approximately 20 mm copper, 1 oz FR4 Board. 4. Pulse Test: Pulse Width 380 s, Duty Cycle 2.0%. www.onsemi.com 2