STPS60L30C-Y Automotive power Schottky rectifier Features A1 K Very small conduction losses A2 Negligible switching losses Extremely fast switching AEC-Q101 qualified Pin 10 K Description Pin 11 K 60 A dual center tab Schottky rectifier suitable for K automotive applications. Pin 1 A1 Packaged in PowerSO-20 (slug up), this device is A2 especially intended for use in a low voltage Pin 20 applications. K PowerSO-20 (slug up) STPS60L30CKY-TR Table 1. Device summary Symbol Value I 2 x 30 A F(AV) V 30 V RRM T 150 C j(max) V 0.415 V F(max) December 2010 Doc ID 18296 Rev 1 1/7 www.st.com 7Characteristics STPS60L30C-Y 1 Characteristics Table 2. Absolute rating (limiting value, per diode) Symbol Parameter Value Unit V Repetitive peak reverse voltage 30 V RRM (1) IF Forward rms current 45 A (RMS) T = 130 C, = 0.5 Per diode 30 c (1) IF Average forward current A (AV) Square pulse Per device 60 (1) I Surge non repetitive forward current t = 10 ms Sinusoidal 250 A FSM p T Storage temperature range -65 to +175 C stg T Operating junction temperature range -40 to +150 C j T Recommended reflow soldering temperature range 245 +0/-5 C R 1. All anode pins (A1, A2) must be connected Table 3. Thermal parameters Symbol Parameter Value Unit Per diode 0.95 R Junction to case C/W th(j-c) Per device 0.61 R Coupling 0.27 C/W th(c) When diodes 1 and 2 are used simultaneously: T = P x R + P x R j(diode 1) (diode1) th(j-c)(Per diode) (diode 2) th(c) Table 4. Static electrical characteristics (per diode) Symbol Parameter Test conditions Min. Typ. Max. Unit T = 25 C 2mA j Reverse leakage (1) I V = V R R RRM current T = 125 C 400 mA j T = 25 C I = 10 A 0.420 j F T = 125 C I = 10 A 0.310 j F (1) (2) V Forward voltage drop V F T = 25 C I = 30 A 0.490 j F T = 125 C I = 30 A 0.415 j F 1. Pulse test : t = 380 s, < 2% p 2. All anode pins (A1, A2) must be connected To evaluate the maximum conduction losses use the following equation: 2 P = 0.315 x I + 0.00333 x I F(AV) F (RMS) 2/7 Doc ID 18296 Rev 1