STTH5L06 Turbo 2 ultrafast high voltage rectifier Datasheet - production data K A Description The device is developed using ST s Turbo 2 600 K V technology. It is well-suited as a boost diode, especially for use in continuous mode power factor corrections and hard switching conditions. This device is also intended for use as a free A wheeling diode in power supplies and other A K power switching applications. TO-220AC K Table 1: Device summary TO-220FPAC A Symbol Value IF(AV) 5 A VRRM 600 V DO-201AD IR (max) 125 A / 150 A K T (max) 175 C j V (typ) 0.85 V F K K trr (typ) 65 ns K K A A NC NC DPAK Features Ultrafast switching Low reverse recovery current Reduces switching losses Low thermal resistance Insulated package: TO-220FPAC Insulation voltage: 2000 V sine RMS ECOPACK 2 compliant component for DPAK on demand May 2017 DocID8371 Rev 5 1/15 www.st.com This is information on a product in full production. Characteristics STTH5L06 1 Characteristics Table 2: Absolute ratings (limiting values at 25 C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V TO-220AC TO-220FPAC 20 IF(RMS) Forward rms current A DO-201AD DPAK 10 TO-220AC, DPAK TC = 150 C Average forward current DO-201AD IF(AV) Tl = 50 C 5 A = 0.5, square wave TO-220FPAC TC = 135 C Repetitive peak forward A IFRM tP = 5 s, F = 5 kHz square 65 current TO-220AC 90 TO-220FPAC Surge non repetitive IFSM tp = 10 ms sinusoidal A forward current DO-201AD 110 DPAK 60 T Storage temperature range -65 to +175 C stg Tj Maximum operating junction temperature 175 C Table 3: Thermal parameter Symbol Parameter Max. value Unit TO-220AC / DPAK 3.5 R Junction to case C/W th(j-c) TO-220FPAC 6 R Junction to lead 20 th(j-l) L = 10 mm, DO-201AD C/W R Junction to ambient 75 th(j-a) 2/15 DocID8371 Rev 5