VN5E010MHTR-E STMicroelectronics

VN5E010MH-E Single-channel high-side driver with analog current sense for automotive applications Features Max supply voltage V 41 V CC Operating voltage range V 4.5 V to 28 V CC Typ. ON-state resistance R 10 m ON Current limitation (typ) I 85 A LIMH Reverse battery protection with self switch (1) OFF-state supply current I 2 A S on of the Power MOSFET Electrostatic discharge protection 1. Typical value with all loads connected. Application General Inrush current active management by All types of resistive, inductive and capacitive power limitation loads Very low standby current 3 V CMOS compatible inputs Description Optimized electromagnetic emissions The VN5E010MH-E is a single-channel high-side Very low electromagnetic susceptibility driver manufactured in the ST proprietary In compliance with the 2002/95/EC VIPower M0-5 technology and housed in the tiny european directive HPAK package. The VN5E010MH-E is designed Very low current sense leakage to drive 12 V automotive grounded loads delivering protection, diagnostics and easy 3 V Diagnostic functions and 5 V CMOS compatible interface with any Proportional load current sense microcontroller. High current sense precision for wide current range The device integrates advanced protective functions such as load current limitation, inrush Current sense disable and overload active management by power Output short to ground indication limitation, overtemperature shut-off with auto Overload and short to ground (power restart and overvoltage active clamp. limitation) indication A dedicated analog current sense pin is Thermal shutdown indication associated with every output channel in order to Protections provide enhanced diagnostic functions including Undervoltage shutdown fast detection of overload and short-circuit to Overvoltage clamp ground through power limitation indication and Load current limitation overtemperature indication. Self limiting of fast thermal transients The current sensing and diagnostic feedback of Protection against loss of ground and loss the whole device can be disabled by pulling the of V CC CS DIS pin high to allow sharing of the external Overtemperature shutdown with sense resistor with other similar devices. autorestart (thermal shutdown) September 2013 Doc ID 15681 Rev 6 1/34 www.st.com 1 Contents VN5E010MH-E Contents 1 Block diagram and pin configuration . 5 2 Electrical specifications 7 2.1 Absolute maximum ratings . 7 2.2 Thermal data . 8 2.3 Electrical characteristics . 9 2.4 Waveforms 17 2.5 Electrical characteristics curves 19 2.6 Application information . 22 2.7 Load dump protection 22 2.8 MCU I/Os protection . 22 2.9 Current sense and diagnostic 23 2.10 Maximum demagnetization energy (V = 13.5 V) . 24 CC 3 Package and PC board thermal data . 25 3.1 HPAK thermal data 25 4 Package and packing information . 28 4.1 ECOPACK . 28 4.2 HPAK mechanical data . 28 4.3 HPAK suggested land pattern . 30 4.4 Packing information . 31 5 Order codes . 32 6 Revision history . 33 2/34 Doc ID 15681 Rev 6