VNQ830PTR-E STMicroelectronics

VNQ830P-E Quad channel high-side driver Datasheet - production data Undervoltage shutdown Overvoltage clamp Output stuck to V detection CC Load current limitation Reverse battery protection Electrostatic discharge protection 62 GRXEOH LVODQG Description 36 * 3* The VNQ830P-E is a quad HSD formed by assembling two VND830P-E chips in the same Features SO-28 package. The VND830P-E is a monolithic device made using STMicroelectronics Type R I V VIPower M0-3 technology. The VNQ830P-E is DS(on) OUT CC intended for driving any type of multiple load with (1) VNQ830P-E 65 m 6 A 36V one side connected to ground. 1. Per each channel. The active V pin voltage clamp protects the CC device against low energy spikes. Active current ECOPACK : lead free and RoHS compliant limitation combined with thermal shutdown and automatic restart protects the device against Automotive Grade: compliance with AEC over-load. The device detects the open-load guidelines condition in both the on and off-state. Very low standby current In the off-state the device detects if the output is CMOS compatible input shorted to V . The device automatically turns off CC On-state open-load detection in the case where the ground pin becomes Off-state open-load detection disconnected. Thermal shutdown protection and diagnosis Table 1. Device summary Order codes Package Tube Tape and reel SO-28 VNQ830P-E VNQ830PTR-E February 2015 DocID10861 Rev 6 1/28 This is information on a product in full production. www.st.comContents VNQ830P-E Contents 1 Block diagram and pin description . 5 2 Electrical specifications 7 2.1 Absolute maximum ratings . 7 2.2 Thermal data . 8 2.3 Electrical characteristics . 8 2.4 Electrical characteristics curves 14 3 Application information . 17 3.1 GND protection network against reverse battery . 17 3.1.1 Solution 1: a resistor in the ground line (RGND only) 17 3.1.2 Solution 2: a diode (D ) in the ground line 18 GND 3.2 Load dump protection 18 3.3 MCU I/O protection 18 3.4 Open-load detection in off-state 19 3.5 Maximum demagnetization energy (V = 13.5 V) . 20 CC 4 Package and PCB thermal data . 21 4.1 SO-28 thermal data . 21 5 Package information 24 5.1 SO-28 package information . 24 5.2 SO-28 packing information 26 6 Revision history . 27 2/28 DocID10861 Rev 6