Product Information

T0603FF3000TM

T0603FF3000TM electronic component of AEM

Datasheet
Surface Mount Fuses 0603 3.0A 32V

Manufacturer: AEM
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

5: USD 0.1177 ea
Line Total: USD 0.5885

15612 - Global Stock
Ships to you between
Wed. 11 Oct to Mon. 16 Oct
MOQ: 5  Multiples: 5
Pack Size: 5
Availability Price Quantity
7255 - Global Stock


Ships to you between
Wed. 11 Oct to Mon. 16 Oct

MOQ : 5
Multiples : 5
5 : USD 0.1215
50 : USD 0.1009
150 : USD 0.0906
500 : USD 0.0829
2500 : USD 0.0665
5000 : USD 0.0634

     
Manufacturer
AEM
Product Category
Surface Mount Fuses
Product
Chip Fuse
Fuse Type
Fast Blow
Current Rating
3A3 A
Voltage Rating DC
35V35 V
Packaging
reelReel
Brand
AEM
Rohs
Y
Package
0603
Nominal Cold Resistance
17.6mO17.6 MOhms
Breaking Capacity @ Rated Voltage
35A35A
Melting I T
0.33
Operating Temperature
- 50°C ~ 90°C - 50 C ~ 90 C
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
F0603HI3000V032T electronic component of AEM F0603HI3000V032T
Surface Mount Fuses 0603 3.0A 32V
Stock : 170
AF1206F3.50TM electronic component of AEM AF1206F3.50TM
Surface Mount Fuses 1206 3.5A
Stock : 2
F0603FF2000V032TM electronic component of AEM F0603FF2000V032TM
Surface Mount Fuses 0603 2.0A 32V w/ body marking
Stock : 210
F0603SB2500V032TM electronic component of AEM F0603SB2500V032TM
Surface Mount Fuses 0603 2.5A 32V w/ body marking
Stock : 10
T0603FF2500TM electronic component of AEM T0603FF2500TM
Surface Mount Fuses 0603 2.5A 32V
Stock : 130
AF1206F2.50TM electronic component of AEM AF1206F2.50TM
Surface Mount Fuses 1206 RoHS
Stock : 11
T0603HI2500TM electronic component of AEM T0603HI2500TM
Surface Mount Fuses 0603 RoHS
Stock : 0
F1206VH3500TM electronic component of AEM F1206VH3500TM
Surface Mount Fuses 1206 RoHS
Stock : 65
F0603HI7000V032TM electronic component of AEM F0603HI7000V032TM
Surface Mount Fuses 0603 RoHS
Stock : 95
T0603HI1000TM electronic component of AEM T0603HI1000TM
Surface Mount Fuses 0603 RoHS
Stock : 85
Image Description
MFU1206FF03150P100 electronic component of Vishay MFU1206FF03150P100

Vishay Beyschlag Surface Mount Fuses 63V 3.15A Fast Act Very Quick
Stock : 1

0453.200MR electronic component of Littelfuse 0453.200MR

Littelfuse Surface Mount Fuses 125V .2A NANO2
Stock : 1

0437.375WR electronic component of Littelfuse 0437.375WR

Surface Mount Fuses 125V .375A FA 1206
Stock : 237

Hot 04511.25MRL electronic component of Littelfuse 04511.25MRL

Surface Mount Fuses 125VAC 1.25A .078ohms 451 NANO2
Stock : 1

CCF1N1TTE electronic component of KOA Speer CCF1N1TTE

Surface Mount Fuses 1A AC 125V/DC 60V
Stock : 636

Hot TR/3216FF10-R electronic component of Eaton TR/3216FF10-R

Fuse Chip Fast Acting 10A 24V SMD Solder Pad 1206 T/R
Stock : 1

SF-0402S100-2 electronic component of Bourns SF-0402S100-2

Surface Mount Fuses 1A Slow Blow SinglFuse
Stock : 1

0678H1250-02 electronic component of Bel Fuse 0678H1250-02

Surface Mount Fuses 3916 Surface Mt Fuse 1.25A
Stock : 1

RF0162-000 electronic component of Littelfuse RF0162-000

Surface Mount Fuses 1206 RoHS
Stock : 1

2410F 4A 250V electronic component of Walter 2410F 4A 250V

Surface Mount Fuses SMD RoHS
Stock : 1

Revision of August 2017 TF-FUSE Thin Film Surface Mount Fuses Product Identification: T 0603 FF 1000 T M (1) (2) (3) (4) (5) (6) (1) Product Code: T-Thin Film (2) Size Code: Standard EIA chip sizes (3) Series Code: FFVery Fast Acting, HIHigh Inrush (4) Current Rating Code: 05000.5A, 10001.0A (5) Package Code: TTape & Reel BBulk (6) Marking Code: MWith mark (optional) Environmental Tests: No. Test item Requirement Test condition Reference 1A: 10% DCR change max. 1 Bending 2mm Refer to AEM QIQ034 >1A: 20% DCR change max. MIL-STD-202 2 Solderability 95% coverage min. One dip at 255 for 5 seconds Method 208 DCR change within 10% MIL-STD-202 3 Thermal shock 100 cycles between -55C and +125C No mechanical damage Method 107 Moisture DCR change within 10% MIL-STD-202 4 10 cycles resistance No excessive corrosion Method 106 MIL-STD-202 DCR change within 10% 5 Salt spray 5% salt solution, 48 hour exposure Method 101 No excessive corrosion Mechanical DCR change within 10% MIL-STD-202 6 0.4 D.A. or 30G between 5 and 3000 Hz vibration Method 204 No mechanical damage MIL-STD-202 DCR change within 10% 7 Mechanical shock 1500G, 0.5 ms, half sine shocks Method 213 No mechanical damage Change of voltage drop 75% rated current, 2000 hours, ambient 8 Life Refer to AEM QIQ106 within 10%, no open circuit temperature +20C to 30C Thermal Shock When Making Correction with a Soldering Iron: The temperature of solder iron tip should be controlled under 350 C and soldering time should be less than 3 sec. The soldering iron tip should not directly touch the top side termination of the component. Fig 3 Correct handling method of soldering iron Website: www.aemchina.com & www.aemcomponents.com Revision of August 2017 TF-FUSE Thin Film Surface Mount Fuses Temperature Effect on Current Rating: Recommended Reflow Soldering Profile: Pb-Free Profile Feature Assembly Preheat/Soak Temperature Min (T ) 150C smin Temperature Max(T ) 200C smax Time(t ) from (T to T ) 60~120 seconds s smin smax Ramp-uprate (T to T ) 3C/second max. L p Liquidous temperature(T ) 217C L Time(t ) maintained above T 60~150 seconds L L Peak package body temperature (T ) 260C p Time (t )*within 5C of the specified p 30 seconds * classification temperature (T ) c Ramp-down rate (T to T ) 6C/second max. p L Time 25C to peak temperature 8 minutes max. * Tolerance for peak profile temperature (T ) is defined as a p supplier minimum and a user maximum Packaging: Chip Size Parts on 7 inch (178mm) Reel 0603(1608) 8,000 Disclaimer: Specifications are subject to change without notice. AEM products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive, aerospace, medical, life-saving applications, or any other application which requires especially high reliability for the prevention of such defect as may directly cause damage to the third partys life, body or property) not expressly set forth in applicable AEM product documentation. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Warranties granted by AEM shall be deemed void for products used for any purpose not expressly set forth in applicable AEM product documentation. AEM shall not be liable for any claims or damages arising out of products used in applications not expressly intended by AEM as set forth in applicable AEM product documentation. The sale and use of AEM products is subject to AEM terms and conditions of sale. Please refer to AEMs website for updated catalog and terms and conditions of sale. Website: www.aemchina.com & www.aemcomponents.com

Tariff Desc

8536.10 FUSES AND FUSE HOLDERS, subminiature, plug in or pigtail type known as picofuses or microfuses, dimensions NOT exceeding 6mm x 18mm TC 8530773

8536.1 TC 8734467 FUSE LINKS, having ALL of the following:
(a) dimensions NOT exceeding 6.35mm x 32.0mm
(b) current rating NOT exceeding 50A
(c) voltage rating NOT exceeding 250V