SCM0150100 Celduc

S/CON/SCM0150100/D/19/12/14 Page 1/5 UK MOSFET BASED DC SOLID-STATE RELAY SCM0150100 Latest MOSFET technology generation. Ultra low on-state resistance. New innovative isolated driver ensuring fast power transistor turn on and off therefore low power transient. Ultra low output leakage current Control voltage range 4.5-32VDC Low control current consumption Max transient peak 100V voltage Triggered control input to avoid linear control risks Advised max. DC Depend on the voltage protection Mains peak voltage Low conducted and radiated disturbances Max. Load Current 150ADC (with heatsink) DC Mains Control input In & case / Out Dimensions Load current range Connections Weight voltage range voltage range Insulation (WxHxD) 44.5 x 58.2 x 27 (Depends on protection M3 round tabs 0 to 150A 4.5-32VDC 4kV 100g clamping voltage) (with heatsink) M5 round tabs (mm) HIGH SIDE WIRING DIAGRAM LOW SIDE WIRING DIAGRAM Fig. 1 Fig. 2 (Load connected to -) (Load connected to +) Please consult us Please consult us to select the right to select the right protective protective components C1, components C1, D1 & D2. D1 & D2. The red paths The red paths (C1/D1/D2) must (C1/D1/D2) must be as short as be as short as possible possible Fig. 3 INTERNAL DIAGRAM Proud to serve you celduc Data given at Tambient=25C and subject to modification without previous notice r e l a i s celduc S/CON/SCM0150100/D/19/12/14 r e l a i s Page 2/5 UK CONTROL INPUT CHARACTERISTICS CONTROL CURRENT CHARACTERISTIC LABEL VALUE INFO. Fig. 4 vs. CONTROL VOLTAGE Nom. Control voltage Ucnom 12-24VDC Ic (mADC) 45 Nom. Control current Icnom 35mADC 40 typical=4.3V Control voltage range Uc 4.5 32VDC 35 Control current 30 25C See curve Ic 25 42mADC consumption 25 20 Typical= 3.5V Releasing control voltage Ucoffmax 1VDC 15 10 Max. reverse control 5 -Icmax <100A -Ucmax 32VDC voltage 0 02468 10 12 14 1618 20 22 24 26 28 30 32 Current Uc (VDC) See curve Input impedance Rin limitation TIME CHARACTERISTICS CHARACTERISTIC LABEL VALUE Turn on time ton 10s Turn on delay tdon 600s Turn off time toff 10s Turn off delay tdoff 100s Max. On-Off frequency F(on-off) 700Hz POWER OUTPUT CHARACTERISTICS CHARACTERISTIC LABEL VALUE INFO. Depends on protection Mains voltage range Ut Ue Min = RDSon x Ie clamping voltage (D1) Non-repetitive peak voltage Utp 100V Not integrated Please consult us to A voltage clamping mean must be connected across the select the right protective Overvoltage protection D1 components terminals 1 & 2 (see fig 1 & 2) Off-state max reverse voltage drop Ie=150A -Ut 0.85V Uc=0 (internal diode) Resistive Motor Maximum nominal currents Ie max See fig. 9 150A Please contact us Max. non-repetitive peak current Iepeak 1000A See fig. 8 Min. load current Iemin 0mA Utp Tjmax Max. leakage current Ielk max 500A Iemax Max. on-state resistance RDSon 1mOhms Tj=25C 1.9mOhms Tj=125C Typ. output capacitance Cout 2.7nF Utp Junction/case thermal resistance Rthjc 0.45K/W Built-in heatsink thermal resistance Rthra 10K/W Tra=75C vertically mounted Heatsink thermal time constant Tthra 10 minutes Tra=60C Control inputs/power outputs Uimp 4kV insulation voltage Inputs/case insulation voltage Uimp 4kV Outputs/case insulation voltage Uimp 4kV Isolation resistance Rio 1G Isolation capacitance Cio <8pF Maximum junction temperature Tjmax 175C Storage ambient temperature Tstg -40->+100C Operating ambient temperature Tamb -40->+90C See fig. 9 Max. case temperature Tc 100C POWER CIRCUIT TIME CHARACT. INPUT CIRCUIT