Product Information


Product Image X-ON


Manufacturer: Chemtools
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges

Price (USD)

1: USD 17.7733 ea
Line Total: USD 17.7733

0 - Global Stock
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - Global Stock

Ships to you between Fri. 16 Jun to Thu. 22 Jun

MOQ : 1
Multiples : 1

Stock Image


1 : USD 17.7733
5 : USD 15.6955
10 : USD 14.6485

Product Category
Cleaner Type
Flux Remover
Cleaner Applications
Optical, PCBs
Dispensing Method
300 g
Show Stocked Products With Similar Attributes. LoadingGif
Image Description
Stock Image CT-ACC400
Stock : 0
Stock Image WKNC-5-5
Stock : 47
Stock Image 8401-20
Stock : 0
Stock Image CT-FRGP300
Stock : 38
Stock Image CT-FRHD300
Stock : 35
Stock Image CT-ISO1L
Stock : 10
Stock Image WKNC-3-5
Stock : 25
Stock Image WKNC-2-5
Stock : 0
Stock Image WKNC-1-5
Stock : 10
Image Description
Stock Image F-596-C

Stock : 1

Stock Image RVUVK105CH020BW-F

CAP, HIGH FREQ, 0402, 50V, C0H
Stock : 1

Stock Image MPZ2012-KIT

Stock : 1

Stock Image RVEVK105CH3R9JW-F

CAP, HIGH FREQ, 0402, 16V, C0H
Stock : 1

Stock Image RMJMK063BJ224MP-F

CAP 0.22UF 6.3VDC X5R 20% SMD 0201
Stock : 1

Stock Image RMUMK105CG3R9CV-F

CAP, MLCC, 0402, 50V, C0G, 3.9
Stock : 1

Stock Image OSTOQ025350

Conn Shrouded Header (4 Sides) HDR 2 POS 5.08mm Solder ST Thru-Hole
Stock : 1

Stock Image F-465-C

F465C waldom
Stock : 1

Stock Image F-524-C

F524C waldom
Stock : 1

Stock Image F-040-C

F040C waldom
Stock : 1

Kleanium DeFlux-It G2 Aerosol 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: Chemtools Kleanium DeFlux-It G2 Flux Remover Aerosol Product Type: Flux solvent for industrial use. Part Numbers: CT-DF-300 Company Address: Chemtools Pty,. Ltd., PO Box 463, Emu Plains, NSW 2750 Ph: 1300 738 250 EMERGENCY PHONE: Australia: Poisons Information Centre 13 1126 International: Infotrac (708) 918 1900 2. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components CAS % HSIS TWA HSIS STEL 3 3 2-methyl pentane 107-83-5 30 - 60 500ppm 1760mg/m 1000ppm 3,500/m 3 3 propan-2-ol 67-63-0 10 - 30 400ppm 983mg/m 500ppm 1,230mg/m 3 3 propylene glycol monomethyl ether 107-98-2 10 - 30 100ppm 369 mg/m 150ppm 553 mg/m 3 3 cyclohexane 110-82-7 <10 100ppm 350 mg/m 300ppm 1050 mg/m 3 n-hexane 110-54-3 <10 20ppm 72mg/m d-Limonene 138-86-3 <10 Not Found 3 3 carbon dioxide 124-38-9 <10 5,000ppm 9,000mg/m 30,000ppm 54,000mg/m 3. HAZARDS IDENTIFICATION Hazard Classification: Hazardous Material, Dangerous Goods according to the criteria of SafeWork Australia and the ADG-7 code) Risk Phrases: R11 Highly flammable R22 Harmful if swallowed R36/38 Irritating to eyes and skin. R43 - May cause sensitisation by skin contact. R67 Vapours may cause drowsiness and dizziness. R51 - Toxic to aquatic organisms. R52 - Harmful to aquatic organisms. R53 - May cause long-term adverse effects in the aquatic environment. Safety Phrases: S20 When using do not eat or drink S21 When using do not smoke S51 Use only in well ventilated areas. S24/25 Avoid contact with skin and eyes. Relevant routes of exposure: Skin, Inhalation, Eyes Potential Health Effects Inhalation: May cause respiratory tract irritation. High concentrations of vapours may cause headache, fatigue, drowsiness and dizziness. Skin contact: May cause allergic skin reaction. May cause skin irritation. Product has a defatting effect on skin. Prolonged contact may cause dryness of skin. Eye contact: Contact with eyes will cause irritation. Ingestion: Harmful. May cause lung damage if swallowed. 4. FIRST AID MEASURES Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention. Skin contact: Wash with soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse. Get medical attention if symptoms occur. Eye contact: Check for and remove any contact lenses. Immediately flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time. Get medical attention. Ingestion: Do not induce vomiting. Rinse mouth thoroughly. Loosen any tight clothing. Keep individual calm. Obtain medical attention. 5. FIRE-FIGHTING MEASURES Flash point: 0C Cleveland closed cup Autoignition temperature: >200C Flammable/Explosive limits-lower %: 0.7% Flammable/Explosive limits-upper %: 8.3% Extinguishing media: Foam, dry chemical or carbon dioxide. Material Safety Data Sheet info Issued by: Chemtools Pty., Ltd., Page 1 of 4 Kleanium DeFlux-It G2 Aerosol Special fire fighting procedures: None Unusual fire or explosion hazards: None Hazardous combustion products: Oxides of carbon. Irritating organic vapours. Keep run-off water out of sewers and water sources. Hazchem Code: 2 Y E 6. ACCIDENTAL RELEASE MEASURES Environmental precautions: Extinguish all ignition sources. Ventilate well. Use approved respirator if air contamination is above accepted level. Prevent product from entering drains or open waters. Clean-up methods: Soak up with inert absorbent. Store in a partly filled, closed container until disposal. 7. HANDLING AND STORAGE Handling: Avoid contact with eyes, skin and clothing. Avoid breathing vapour and mist. Wash thoroughly after handling. Storage: For safe storage, store at or below 38C (100F). Keep in a cool, well-ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Incompatible products: Refer to Section 10. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering controls: No specific ventilation requirements noted, but forced ventilation may still be required if concentrations exceed occupational exposure limits. Respiratory protection: Use NIOSH approved respirator if there is potential to exceed exposure limit(s). Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene gloves. butyl rubber gloves. Natural rubber gloves. Eye/face protection: Safety goggles or safety glasses with side shields. See Section 2 for exposure limits. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state: Liquid in aerosol canister. Colour: Clear, colourless. Odour: Organic solvents. pH: Not available Boiling point/range: >80C. Melting point/range: Not available Specific gravity: 0.78 at 20C. Vapour density: >1 Evaporation rate: Not available Solubility in water: Insoluble. 10. STABILITY AND REACTIVITY Stability: Stable. Hazardous polymerization: Will not occur. Hazardous decomposition products: Oxides of carbon. Incompatibility: Strong oxidizers. Strong reducing agents. Conditions to avoid: SeeHandling and Storag (Section 7) andIncompatibilit (Section 10). 11. TOXICOLOGICAL INFORMATION Product toxicity data: 2-methyl pentane Expected to be of low toxicity: LD >2000mg/kg, Rat. Aspiration into lungs when swallowed 50 or vomited may cause chemical pneumonitis which can be fatal. n-hexane Oral: LD 28,710 mg/Kg (rat). Irritation eye: 10 mg mild (rabbit). Investigated as a 50 tumorigen, mutagen and reproductive effector. Carcinogenic effects: None by IARC Isopropyl alcohol Oral: LD 5,045 mg/Kg (rat). Skin: LD 12.8g/Kg (rabbit) Inhalation LC : 16,000ppm/8hr 50 50 50 (rat) Investigated as a tumorigen, mutagen, and reproductive effector. Carcinogenic effects: IARC Category 3 1-methoxy-2-propanol Oral: LD 5,660 mg/Kg (rat). Skin: LD 13.0g/Kg (rabbit) Inhalation LC : 10,000ppm/5hr 50 50 50 (rat) Investigated as a reproductive effector Carcinogenic effects: None by IARC Cyclohexane Oral: LD >2,000 mg/Kg (rat). Skin: LD >2g/Kg (rat) Inhalation LC : >20mg/L/4hr (rat) 50 50 50 Investigated as a carcinogen. d-limonene: ORAL (LD ): Acute: 4400 mg/kg Rat . 5600 mg/kg Mouse . DERMAL (LD ): Acute: 5000 50 50 mg/kg Rabbit . LC Inhalation : Not available. 50 Material Safety Data Sheet info Issued by: Chemtools Pty., Ltd., Page 2 of 4

Tariff Desc

3403 Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing as basic constituents, 70% or more by weight of petroleum oils or of oils obtained from bituminous minerals:
3403.1 -Containing petroleum oils or oils obtained from bituminous minerals:
3403.11 --Preparations for the treatment of textile materials, leather, furskins or other materials:
3403.11.10 ---In solid or semi-solid form 0.0%
3403.11.90 ---Other 0.0%
3814.00.00 Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers: 5.0%
3818.00.00 Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics 0.0%
3506 Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg:
3506.10.00 -Products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg 5.0%