5000W Transient Voltage Suppressor 5KP-G Series Breakdown Voltage: 6.8 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device R-6 Features - Glass passivated chip. 0.052(1.32) DIA. 0.048(1.22) - 5000W peak pulse power capability with a 10/1000s waveform, repetitive rate (duty cycle):0.01% 1.0(25.4) - Low leakage. MIN. - Uni and Bidirectional unit. - Excellent clamping capability. - Very fast response time. 0.360(9.14) R - UL recognized file E349157 0.340(8.64) - Range: 5KP5.0(C)A thru. 5KP190(C)A 0.360(9.14) DIA. 0.340(8.64) Mechanical Data -Case: Molded plastic. 1.0(25.4) MIN. -Epoxy: UL 94V-0 rate flame retardant -Lead: Solderable per MIL-STD-202, method 208 guranteed. -Polarity: Color band denotes cathode Dimensions in inches and (millimeter) end except Bipolar. -Mounting position: Any Maximum Ratings and Electrical Characteristics Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive loaded. For capacitive load, derated current by 20%. Symbol Parameter Value Unit Peak power dissipation with a 10/1000 s PPP 5000 W waveform (Note 1) Peak pulse current with a 10/1000 s waveform IPP A See Next Table (Note 1) Power dissipation on infinite heatsink at TL=75C 8.0 PD W Peak forward surge current, 8.3ms single IFSM 500 A half sine-wave unidirectional only (Note 2) Maximum instantaneous forward voltage at VF 3.5 / 5.0 V 100A for uni-directional devices only (Note 3) Operating junction and storage temperature TJ, TSTG -55 to +150 C range NTOES: (1) Non-repetitive current pulse, per fig.5 and derated above TA=25C per fig.1 (2) Measured on 8.3 ms single half sine wave of equivalent square wave, duty cycle=4 pulses per minute maximum. (3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V Company reserves the right to improve product design , functions and reliability without notice. REV:D QW-BTV08 Page 1 Comchip Technology CO., LTD.5000W Transient Voltage Suppressor RATING AND CHARACTERISTIC (5KP-G Series) Fig.1 - Pulse Derating Curve Fig.2 - Maximum Non-Repetitive Surge Current 500 100 TJ = TJ Max 8.3ms Single Half 450 Sine-Wave 75 400 350 50 300 25 250 0 200 0 25 50 75 100 125 150 175 200 1 10 100 Ambient Temperature, TA (C) Number of Cycle at 60 HZ Fig.3 - Steady State Power Derating Curve Fig.4- Peak Pulse Power Rating Curve 8 100 6 10 4 1 2 0 0.1 0 25 50 75 100 125 150 175 200 0.1 1 10 100 1000 10000 Lead Temperature,TL (C) Pulse Width, td (s) Fig.5 - Pulse Waveform Fig.6 - Typical Junction Capacitance 125 100000 TJ = 25C Bi-directional Tr = 10 s zero bias Pulse width (td) is defined as the point where the peak current decays to 50% of IPP Uni-directional Peak value IPP 100 10000 zero bias 75 1000 Uni-directional VRWM Half value = IPP/2 50 100 Bi-directional VRWM 10/1000 s. Waveform as defined by R.E.A. 10 25 TJ=25C td f=1.0MHz 0 1 0 1 2 3 4 1 10 100 1000 Time, (ms) Breakdown Voltage, VBR (V) Company reserves the right to improve product design , functions and reliability without notice. REV:D QW-BTV08 Page 2 Comchip Technology CO., LTD. Peak Pulse Derating in Percentage Steady State Power Dissipation, (W) Peak Pulse Current, (%) of Peak Power or Current, (%) Junction Capacitance ,CJ (PF) Peak Power, (Kw) Peak Forward Surge Current, (A)