SMD Transient Voltage Suppressor ATV15C5V0-HF Thru. ATV15C441-HF Working Peak Reverse Voltage: 5.0 to 440 Volts Power Dissipation: 1500Watts RoHS Device Halogen Free SMC/DO-214AB Features 0.280(7.02) - Glass passivated chip. 0.260(6.52) - 1500W peak pulse power capability with a 10/1000s waveform, repetitive rate (duty cycle):0.01% 0.126(3.16) 0.245(6.15) 0.220(5.52) 0.114(2.86) - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. 0.320(8.02) - Very fast response time. 0.305(7.64) 0.012(0.30) 0.006(0.15) - Comply with AEC-Q101 0.103(2.59) 0.079(1.98) R - UL recognized file E349157 - Range: ATV15C5V0J(B) thru. ATV15C850J(B) 0.008(0.20) 0.060(1.51) 0.000(0.00) 0.030(0.75) Mechanical Data Dimensions in inches and (millimeter) - Case: DO-214AB/SMC molded plastic. - Epoxy: UL 94V-0 rate flame retardant Circuit Diagram - Terminals: Solderable per MIL-STD-750, method 2026. Bi-directional Uni-directional - Polarity: Color band denoted cathode end except bipolar. - Weight: 0.22 grams(approx) Maximum Ratings and Electrical Characteristics Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Characteristics Value Units Peak power dissipation with a 10/1000 s PPP 1500 W waveform (Note 1) Peak pulse current with a 10/1000 s IPP See table 1 A waveform (Note 1) Power dissipation on infinite heatsink PD 6.5 W at TL=75C Peak forward surge current, 8.3ms single IFSM 200 A half sine-wave uni-directional only (Note 2) Maximum instantaneous forward voltage VF 3.5/5.0 V at 100A for uni-directional only (Note 3) Operation junction and storage TJ, TSTG -55 to +150 C temperature range O No tes 1: . Non-repetitive current pulse, per Fig. 5 and derated above TA=25 C, per Fig. 1 2. Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. 3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V Company reserves the right to improve product design , functions and reliability without notice. REV:A AQW-JTV06 Page 1 Comchip Technology CO., LTD.SMD Transient Voltage Suppressor Ratings and Characteristics Curve (ATV15C5V0-HF Thru. ATV15C441-HF) Fig.1 - Pulse Derating Curve Fig.2 - Max. Non-Repetitive Surge Current 100 200 8.3mS single half sine-wave (JEDEC method) TJ=TJ , max. 160 75 120 50 80 25 40 0 0 0 25 50 75 100 125 150 175 1 10 100 Ambient Temperature, (C ) Number of Cycles at 60Hz Fig.3 - Steady State Power Derating Curve Fig.4 - Peak Pulse Power Rating Curve 7 100 6 5 10 4 3 1.0 2 1 0 0.1 0.1 1 10 100 1000 10000 0 25 50 75 100 125 150 175 Pulse Width, ( s) Lead Temperature, (C ) Fig.6 - Typical Junction Capacitance Fig.5 - Pulse Waveforem 100000 TJ = 25C TR=10 s Pluse width(td) is defined as the point where the peak current Bi-directional 100 Peak value decays to 50% of Ipp zero bias 10000 (Ipp) Uni-directional zero bias 1000 Ipp Half Value= 2 Uni-directional VRWM 50 100 10 / 1000 sec. waveform as defined by R.E.A. 10 Bi-directional VRWM td O C TJ=25 C f=1.0MHz 1 0 1 10 100 1000 0 1.0 2.0 3.0 4.0 Time, (ms) Reverse Breakdown Voltage, (V) Company reserves the right to improve product design , functions and reliability without notice. REV:A AQW-JTV06 Page 2 Comchip Technology CO., LTD. Peak Pulse Derating in Percentage of Peak Pulse Current, (%) Steady Power Dissipation, (W) Peak Power or Current, ( % ) Junction Capacitance, (pF) Peak Power, (kW ) Peak Forward Surge Current, (A)