SMD Transient Voltage Suppressor ATV50C110-G Thru. ATV50C441-G Working Voltage: 11 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device Features SMC/DO-214AB - Glass passivated chip. 0.281(7.15) - 5000W peak pulse power capability with a 10/1000s 0.260(6.60) waveform, repetitive rate (duty cycle):0.01% - Low leakage. 0.126(3.20) 0.238(6.04) 0.114(2.90) 0.219(5.55) - Uni and Bidirectional unit. - Excellent clamping capability. - Comply with AEC-Q101 0.313(7.95) - Very fast response time. 0.305(7.75) 0.012(0.30) 0.006(0.15) - UL recognized file E349157 R 0.100(2.53) 0.078(1.98) Mechanical Data 0.008(0.20) 0.059(1.51) 0.000(0.00) 0.030(0.75) - Case: DO-214AB/SMC molded plastic. - Epoxy: UL 94V-0 rate flame retardant Dimensions in inches and (millimeter) - Lead: Solderable per MIL-STD-750, method 2026. Circuit Diagram - Polarity: Color band denoted cathode end except bipolar. Bi-directional Uni-directional - Mounting position: Any - Weight: 0.230 gram (approx.) Maximum Ratings and Electrical Characteristics Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Parameter Value Units Peak power dissipation with a 10/1000 s PPP 5000 W waveform (Note 1) Peak pulse current with a 10/1000 s IPP See Next Table A waveform (Note 1) Power dissipation on infinite heatsink PD 6.5 W at TL=75C Peak forward surge current, 8.3ms single IFSM 300 A half sine-wave unidirectional only (Note 2) Maximum instantaneous forward voltage VF 3.5/5.0 V at 100A for unidirectional only (Note 3) Operation junction and storage TJ, TSTG -55 to +150 C temperature range No tes 1: . Non-repetitive current pulse, per Fig.5 and derated above TA=25C, per Fig.1 2. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V Company reserves the right to improve product design , functions and reliability without notice. REV: C AQW-BTV04 Page 1 Comchip Technology CO., LTD.SMD Transient Voltage Suppressor RATING AND CHARACTERISTIC CURVES (ATV50C110-G thru. ATV50C441-G) Fig.1 - Pulse Derating Curve Fig.2 - Maximum Non-Repetitive Surge Current 140 350 120 300 100 250 80 200 60 150 40 100 8.3ms single half 20 sine-wave (JEDEC method) 50 TJ=TJ max. 0 0 25 50 75 150 175 0 100 125 1 10 100 Ambient Temperature, TA (C) Number of Cycles at 60Hz Fig.4 - Peak Pulse Power Rating Curve Fig.3 - Steady State Power Derating Curve 100 7 6 5 10 4 3 1 2 1 0.1 0 0.1 1 10 100 1000 10000 0 25 50 75 100 125 150 175 Pulse Width, td (s) Lead Temperature, TL (C) Fig.6 - Typical Junction Capacitance Fig.5 - Pulse Waveforem 10000 TJ = 25C Tr=10 s Bi-directional Pluse width(td) is defined as the zero bias point where the peak current Uni-directional 100 Peak value decays to 50% of Ipp zero bias (Ipp) 1000 Uni-directional VRWM Ipp Half Value= 2 100 50 Bi-directional VRWM 10 / 1000 sec. waveform 10 as defined by R.E.A. TJ=25C td f=1.0MHz 1 0 1 10 100 1000 0 1.0 2.0 3.0 4.0 Time, (ms) Reverse Breakdown Voltage, VBR (V) Company reserves the right to improve product design , functions and reliability without notice. REV: C AQW-BTV04 Page 2 Comchip Technology CO., LTD. Peak Pulse Derating in Percentage Peak Pulse Current, (%) Steady State Power Dissipation, (W) of Peak Power or Current, (%) Peak Forward Surge Current, (A) Junction Capacitance, CJ (pF) Peak Power, (kW)