DSS4160T 60V NPN LOW SATURATION TRANSISTOR IN SOT23 Features Mechanical Data BV > 60V Case: SOT23 CEO I = 1A High Continuous Collector Current Case Material: Molded Plastic,Green Molding Compound. C I = 2A Peak Pulse Current UL Flammability Classification Rating 94V-0 CM R = 280m for a Low Equivalent On-Resistance Moisture Sensitivity: Level 1 per J-STD-020 CE(sat) Terminals: Finish Matte Tin Plated leads, Solderable per Low Saturation Voltage V < 280mV 1A CE(sat) MIL-STD-202, Method 208 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Weight: 0.008 grams (Approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP Capable (Note 4) SOT23 C E C B B E Top View Top View Device Symbol Pin-Out Ordering Information (Notes 4 & 5) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel DSS4160T-7 AEC-Q101 ZN9 7 8 3,000 Automotive DSS4160TQ-7 ZN9 7 8 3,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See DSS4160T Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V 80 V CBO Collector-Emitter Voltage V 60 V CEO Emitter-Base Voltage V 5 V EBO Continuous Collector Current 1 A IC Peak Pulse Collector Current 2 A I CM Base Current 300 mA I B Peak Base Current 1 A I BM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Power Dissipation (Note 6) 725 mW PD Thermal Resistance, Junction to Ambient (Note 6) 172 C/W R JA Thermal Resistance, Junction to Leads (Note 7) 79 C/W R JL Operating and Storage Temperature Range T , T -55 to +150 C J STG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 6. For a device mounted with the collector lead on 15mm x 15mm 1oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 7. Thermal resistance from junction to solder-point (at the end of collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 DSS4160T May 2018 Diodes Incorporated www.diodes.com Document number: DS35531 Rev. 3 - 2