A Product Line of Diodes Incorporated FMMT620 80V NPN SILICON LOW SATURATION TRANSISTOR IN SOT23 Features Mechanical Data Case: SOT23 BV > 80V CEO I = 1.5A Continuous Collector Current Case Material: molded plastic, Green molding compound C R = 90m for a low equivalent On-Resistance CE(SAT) UL Flammability Classification Rating 94V-0 625mW Power dissipation Moisture Sensitivity: Level 1 per J-STD-020 h specified up to 5A for high current gain hold up FE Terminals: Finish Matte Tin Plated Leads, Solderable per Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) MIL-STD-202, Method 208 Halogen and Antimony Free. Green Device (Note 3) Weight 0.008 grams (approximate) Qualified to AEC-Q101 Standards for High Reliability PPAP capable (Note 4) Applications DC-DC Modules Power Management Functions Motor control and drive functions CCFL Backlighting Inverters SOT23 C E C B B E Top View Device Symbol Top View Pin-Out Ordering Information (Notes 4 & 5) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel FMMT620TA AEC-Q101 620 7 8 3,000 FMMT620QTA Automotive 620 7 8 3,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See A Product Line of Diodes Incorporated FMMT620 Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage 100 V V CBO Collector-Emitter Voltage 80 V V CEO Emitter-Base Voltage V 7 V EBO Continuous Collector Current I 1.5 A C Peak Pulse Current I 5 A CM Base Current I 500 mA B Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Power Dissipation (Note 6) 625 mW P D Power Dissipation (Note 7) 806 mW P D Thermal Resistance, Junction to Ambient (Note 6) 200 R C/W JA Thermal Resistance, Junction to Ambient (Note 7) R 155 C/W JA Thermal Resistance, Junction to Leads (Note 8) R 194 C/W JL Operating and Storage Temperature Range T T -55 to +150 C J, STG Notes: 6. For a device surface mounted on 25mm X 25mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions the device is measured when operating in a steady-state condition. 7. Same as note 6, except the device is measured at t 5 sec. 8. Thermal resistance from junction to solder-point (at the end of the collector lead). 2 of 7 September 2012 FMMT620 Diodes Incorporated www.diodes.com Document number: DS33113 Rev. 3 - 2