FMMTA92 300V PNP HIGH VOLTAGE TRANSISTOR IN SOT23 Features Mechanical Data Case: SOT23 BV > -300V CEO Case Material: Molded Plastic, Green Molding Compound I = -200mA High Continuous Collector Current C UL Flammability Classification Rating 94V-0 Complementary Type FMMTA42 Moisture Sensitivity: Level 1 per J-STD-020 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Terminals: Finish Matte Tin Plated Leads, Solderable per Halogen and Antimony Free. Green Device (Note 3) MIL-STD-202, Method 208 Qualified to AEC-Q101 Standards for High Reliability Weight 0.008 grams (Approximate) An Automotive-Compliant Part is Available Under Separate Datasheet (FMMTA92Q) SOT23 C B E Top View Top View Device Symbol Pin-Out Ordering Information (Note 4) Part Number Compliance Marking Reel Size (inches) Tape Width (mm) Quantity Per Reel FMMTA92TA AEC-Q101 4E 7 8 3,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See FMMTA92 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage -300 V V CBO Collector-Emitter Voltage -300 V V CEO Emitter-Base Voltage V -5 V EBO Continuous Collector Current I -200 mA C Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit 310 (Note 5) Power Dissipation mW P D (Note 6) 350 403 (Note 5) Thermal Resistance, Junction to Ambient R C/W JA (Note 6) 357 Thermal Resistance, Junction to Lead (Note 7) R 350 C/W JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted on minimum recommended pad layout 1oz copper that is on a single-sided 1.6mm FR-4 PCB device is measured under still air conditions whilst operating in steady state condition. 6. Same as note 5, except the device is mounted on 15mm x 15mm 1oz copper. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 7 FMMTA92 September 2017 Diodes Incorporated www.diodes.com Document number: DS33128 Rev. 5 - 2