ZUMT718 20V PNP POWER SWITCHING TRANSISTOR IN SOT323 Features Mechanical Data BV > -20V Case: SOT323 CEO I = -1A Continuous Collector Current Case Material: Molded Plastic. Green Molding Compound C I = -3A Peak Pulse Current UL Flammability Rating 94V-0 CM Low Saturation Voltage -250mV Max I = -1A. Moisture Sensitivity: Level 1 per J-STD-020 C R = 200m 1A for a Low Equivalent On-Resistance Terminals: Finish - Matte Tin Plated Leads, Solderable per CE(SAT) 500mW Power Dissipation MIL-STD-202, Method 208 Excellent h Characteristics up to 3A Weight: 0.006 grams (approximate) FE Complementary NPN Type: ZUMT618 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability SOT323 C B E Top View Top View Device Symbol Pin-Out Ordering Information (Notes 4) Device Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per reel ZUMT718TA AEC-Q101 T72 7 8 3,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See ZUMT718 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V -20 V CBO Collector-Emitter Voltage V -20 V CEO Emitter-Base Voltage V -7 V EBO Peak Pulse Current I -3 A CM Continuous Collector Current -1 A I C Base Current I -200 mA B Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 5) 385 Power Dissipation mW P D (Note 6) 500 (Note 5) 325 Thermal Resistance, Junction to Ambient C/W R JA (Note 6) 250 Thermal Resistance, Junction to Leads (Note 7) R 350 C/W JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 8) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with collector lead on 10mm x 8mm 1oz copper that is on a single-sided 0.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as note (5), except the collector lead is on a 25mm x 25mm 1oz copper. 7. Thermal resistance from junction to solder-point (at the end of the leads). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 2 of 6 June 2014 ZUMT718 Diodes Incorporated www.diodes.com Document number: DS33340 Rev. 3 - 2